A vivo tv mount with a power button highlighted

If you’ve recently purchased a Vivo TV mount, congratulations on your new acquisition! However, setting it up can be a daunting task that can leave you perplexed. In this article, we will provide you with a detailed guide on how to turn on and set up your Vivo TV mount. Read on for comprehensive step-by-step instructions on how to unbox, install, attach, and troubleshoot your TV mount.

Unboxing the Vivo TV Mount: What’s in the Box?

Before we can set up the Vivo TV mount, we need to unbox it and take stock of its contents. The Vivo TV mount comes with several components, including a mounting plate, an articulating arm, a VESA adapter plate, mounting screws, a bubble level, and an instruction manual. Ensure that all these components are present and in good condition before you proceed with the installation.

One important thing to note is that the Vivo TV mount is compatible with most flat-screen TVs that have VESA patterns of 75x75mm to 400x400mm. This means that it can support TVs ranging from 32 inches to 55 inches in size. However, it is always advisable to check your TV’s VESA pattern before purchasing the mount to ensure compatibility.

Additionally, the Vivo TV mount has a weight capacity of up to 66 pounds, which means it can support most standard-sized TVs. However, if you have a larger or heavier TV, you may need to consider a different mount that can handle the weight. It is always important to check the weight capacity of the mount before purchasing it to avoid any accidents or damage to your TV.

Understanding the Components of the Vivo TV Mount

Now that we have unboxed and inspected the Vivo TV mount, let’s take a closer look at its individual components.

The mounting plate is the surface on which the TV will rest. It typically has four screw holes, and you will need to attach it to the wall. The articulating arm attaches to the mounting plate and lets you pull the TV away from the wall and rotate it in different directions. The VESA adapter plate is the bracket that the TV mounts onto. It has four screw holes that correspond to those on the TV’s back.

See also  Should the projector screen be at eye level?

The mounting screws are used to attach the mounting plate and adapter plate to the wall and TV, respectively, and come in varying lengths to suit different TV models. The bubble level helps you ensure that the TV is mounted correctly and leveled on the wall to prevent tilting.

Another important component of the Vivo TV mount is the cable management system. This system helps you organize and conceal the cables that connect your TV to other devices, such as a cable box or gaming console. It consists of clips and channels that you can use to route the cables along the arm and behind the TV, keeping them out of sight and reducing clutter.

Finally, the weight capacity of the Vivo TV mount is an essential consideration when choosing a mount for your TV. The weight capacity refers to the maximum weight that the mount can support, and it varies depending on the model. It is crucial to ensure that the mount you choose can support the weight of your TV to prevent accidents and damage to your equipment.

Preparing for Installation: Tools You Need

Before you proceed with the installation, ensure that you have the required tools. These include a drill, a screwdriver, a stud finder or toggle bolts, a tape measure, and a pencil. A stud finder helps locate the wood studs in the wall, while toggle bolts can be used if the wall does not have studs. Use a pencil and tape measure to mark where you intend to mount the TV.

It is also important to have a level to ensure that the TV is mounted straight. A level can be a simple tool, such as a bubble level, or a digital level that provides more precise measurements. Additionally, you may need a power drill and screws that are appropriate for the type of wall you are mounting the TV on. For example, if you are mounting the TV on a concrete wall, you will need masonry screws.

Before you start drilling, it is recommended to turn off the power to the room where you will be working. This will prevent any electrical accidents from occurring. You should also have a friend or family member assist you with the installation, as mounting a TV can be a two-person job. Finally, make sure you have read the manufacturer’s instructions for your specific TV mount, as different mounts may have different installation requirements.

See also  Discovering the Best Yamaha MusicCast BAR 40 for Small Dorm Rooms and Bedrooms

Step-by-Step Guide to Installing Your Vivo TV Mount

Now that we have all the required tools and components let’s proceed with the installation. We will follow these steps:

Step 1: Identify the location where you want to install your TV mount. Use a pencil to mark where you intend to attach the mounting plate.

Step 2: Use a stud finder to locate wood studs in the wall where you intend to install the mounting plate. Once you identify the studs’ location, use a tape measure to ensure that they align with the screw holes on the mounting plate. If the studs don’t align, use toggle bolts instead of screws to secure the mounting plate to the wall.

Step 3: Drill pilot holes into the wall where you will secure the mounting plate. Insert a screw into each pilot hole and tighten using a screwdriver. Ensure that the screw heads sit flush with the wall and that the mounting plate is level.

Step 4: Attach the articulating arm to the mounting plate using the included screws. Tighten the screws to secure the arm to the plate.

Step 5: Once the arm is securely attached to the mounting plate, attach the TV bracket to the back of your TV. Make sure to use the appropriate screws and washers that are included with the bracket.

Step 6: With the help of another person, carefully lift the TV and attach the bracket to the arm. Make sure that the TV is level and securely attached to the arm.

Step 7: Test the mount by gently pushing and pulling the TV to ensure that it is securely attached to the arm and that the arm is securely attached to the mounting plate.

With these simple steps, you can now enjoy your TV viewing experience with your new Vivo TV mount.

How to Attach Your TV to the Vivo TV Mount

Step 5: Take the VESA adapter plate and attach it to the back of the TV using the included screws. Ensure that the screws are tightened securely, but do not overtighten them.

See also  How to Wall Mount Tv With 1 Stud

Step 6: Hang the TV onto the articulating arm and screw the adapter plate onto the mount’s head. Ensure that the TV is held securely, and the adapter plate is leveled.

Step 7: Double-check all the screws and bolts to ensure that they are tightened securely. It is important to make sure that the TV is properly attached to the mount to prevent any accidents or damage to the TV. Once you have confirmed that everything is secure, you can adjust the TV to your desired viewing angle and enjoy your favorite shows and movies.

Adjusting the Tilt and Swivel of Your Vivo TV Mount

The Vivo TV mount allows you to adjust your TV’s tilt and swivel angles. You can tilt the TV up and down or side-to-side or swivel it horizontally. Locate the adjustment screws on the mount’s head and use a screwdriver to tighten or loosen them to achieve the desired angles. Ensure that the TV is level after you make the adjustments.

It is important to note that the weight of your TV will affect the ease of adjusting the tilt and swivel angles. If your TV is heavy, you may need to use more force to adjust the angles. Additionally, if you are unsure about how to adjust the mount, refer to the manufacturer’s instructions or seek professional assistance.

Another factor to consider when adjusting the tilt and swivel angles is the viewing distance and angle. You want to ensure that the TV is positioned at a comfortable viewing angle and distance to prevent eye strain and discomfort. Experiment with different angles and distances until you find the optimal position for your TV.

Troubleshooting Common Issues with Your Vivo TV Mount

If you encounter any issues during the installation or use of your Vivo TV mount, don’t panic. Some of the common problems you may encounter include wobbly TV, crooked mount, or difficulty in adjusting the tilt and swivel angles. Refer to your instruction manual for troubleshooting tips or contact Vivo customer care for further assistance.

With this comprehensive guide, you can now confidently turn on and set up your Vivo TV mount. Follow the instructions painstakingly, and you will have your TV up and running in no time. Happy mounting!

It is important to note that the weight and size of your TV should be compatible with the Vivo TV mount you have purchased. If your TV is too heavy or too large for the mount, it may cause instability and damage to both the mount and your TV. Always check the weight and size specifications of your Vivo TV mount before purchasing and installing it.

By admin