A wall with a flat-screen tv mounted on it

Mounting your TV onto the wall can increase your viewing experience and create more space in your room. Echo Gear TV mount is an excellent product that has gained popularity because of its durability and ease of installation. In this article, we will guide you on how to mount Echo Gear TV mount in a step-by-step process. We will provide you with all the information you need to make the installation process a breeze.

Choosing the Right Location for Your TV

The first thing you need to do before mounting your TV is finding the right location. Choose a location that is visible from your sitting position with minimal glare. Consider the comfort level of your viewing position, the room lighting, the available power outlets, and the structural support. The mounting surface should be sturdy enough to hold the weight of your TV and the mount. Typically the wall is the best surface to use.

Another important factor to consider when choosing the right location for your TV is the distance between the TV and your seating area. The ideal distance for comfortable viewing depends on the size of your TV. As a general rule, the distance should be about 1.5 to 2.5 times the diagonal screen size of your TV. For example, if you have a 50-inch TV, the distance between the TV and your seating area should be between 75 and 125 inches. This will ensure that you have a comfortable viewing experience without straining your eyes or neck.

See also  Can you hang something from the ceiling without a stud?

Preparing Your Wall for the Echo Gear TV Mount

Before attaching the mount to the wall, you need to prepare the area. To do this, you should measure the height and width of your TV. Once you have these measurements, use painter’s tape to outline the dimensions of your TV on the wall at your desired location. This outlines the location of the mount. Next, use a stud finder to locate the studs in the wall. Mark these with painter’s tape. You will attach the mount to the studs because they offer higher stability. If no studs are present in the desired location, use wall anchors to attach the mount.

It is important to note that the weight of your TV should also be taken into consideration when preparing your wall for the Echo Gear TV mount. Make sure to check the weight limit of the mount and compare it to the weight of your TV. If your TV is too heavy for the mount, it could potentially fall off the wall and cause damage or injury. Always prioritize safety when mounting your TV.

Tools and Materials Needed to Install Echo Gear TV Mount

Before starting the installation process, you need to have the right tools and materials. You will need a drill, level, screwdriver, measuring tape, stud finder, painter’s tape, wall anchors, and screws. These tools will make it easy for you to attach the mount to the wall and the TV.

It is important to note that the size and weight of your TV will determine the size and number of screws and wall anchors needed for installation. It is recommended to check the TV’s manual or manufacturer’s website for specific instructions on the appropriate hardware to use. Additionally, it is important to ensure that the wall you are mounting the TV on can support the weight of the TV and the mount. If you are unsure, consult a professional or use a stud finder to locate the studs in the wall for added support.

See also  How to Mount a Bang Olufsen Tv

Step-by-Step Guide to Installing Echo Gear TV Mount

Now that you have all the tools, let’s take you through the installation process of the mount.

Step One: Attach the wall plate to the mount

Start the installation process by attaching the wall plate to the mount. Use screws to secure the wall plate to the mount.

Step Two: Attach the wall plate to the wall

Line up the wall plate on the marked location and use a drill to screw it into the marked studs. For areas without studs, use wall anchors to secure the wall plate to the wall.

Step Three: Attach the VESA plate to your TV

Assemble the VESA plate that comes with the mount and attach it to the back of your TV. The VESA plate should align with the screw holes on the TV’s back. Make sure the VESA plate aligns to the level on the mount.

Step Four: Secure your TV onto Echo Gear TV mount

This step is best done with two people to avoid damages. Lift the TV onto your mount bracket, there will be a clicking noise once the TV is in place and securely locked.

Step Five: Adjust the Tilt and Swivel of Your Mounted TV

You can adjust the tilt angle and swivel direction of your mounted TV by adjusting the wing nuts on the back of the mount plate.

Step Six: Cable Management

After mounting your TV, it’s important to organize the cables to avoid a cluttered look. Use cable ties or cable clips to secure the cables to the mount or wall.

Step Seven: Test the Mount

Before you start using your mounted TV, test the mount by gently pushing and pulling the TV to ensure it’s securely mounted. Also, test the tilt and swivel functions to make sure they work properly.

Tips for Concealing Wires and Cables After Installation

Once you have mounted your TV, you can conceal the TV and home theatre wires to create a tidy look. Use cord covers, cable ties, and cable clips to hide the cables on the wall or behind the TV. This reduces clutter and eliminates tripping hazards.

See also  How High to Mount 85 Inch Tv Reddit

Another option for concealing wires is to use a wire raceway. This is a plastic channel that can be mounted on the wall to hide the cables. It is a great solution for those who want a more permanent and professional-looking installation.

It is important to note that when concealing wires, you should not bundle too many cables together. This can cause overheating and potentially start a fire. Instead, separate the cables and use multiple cord covers or wire raceways if necessary.

Troubleshooting Common Issues with Echo Gear TV Mount Installation

If you experience installation problems like the wall plate shifting or uneven mounting of your TV, review the installation guide or visit Echo Gear’s customer service site for more assistance and troubleshooting tips.

Another common issue that may arise during Echo Gear TV mount installation is difficulty in finding the right studs to mount the wall plate. In such cases, it is recommended to use a stud finder tool or seek professional help to locate the studs accurately.

Additionally, if you encounter issues with the tilt or swivel functionality of your TV mount, ensure that the screws and bolts are tightened properly and that the mount is securely attached to the wall plate. If the problem persists, contact Echo Gear’s customer service for further assistance.

Cleaning and Maintaining Your Mounted TV

Once you have mounted your TV, you need to maintain it to ensure durability. Use a microfiber cloth to clean your TV screen and the mount bracket to prevent scratches. Wipe it frequently to prevent dust buildup and use recommended cleaning solutions to keep it looking brand new.

Mounting your TV with Echo Gear mount is a quick and easy process if you follow the steps above. You can now enjoy watching TV from your desired location with maximum comfort.

It is important to note that you should avoid using harsh chemicals or abrasive materials when cleaning your mounted TV. These can damage the screen and the mount bracket, leading to costly repairs or replacements. Additionally, make sure to unplug your TV before cleaning to avoid any electrical hazards.

Another tip for maintaining your mounted TV is to check the mount bracket regularly for any signs of wear and tear. If you notice any loose screws or bolts, tighten them immediately to prevent the TV from falling off the wall. It is also recommended to have a professional inspect your mount bracket every few years to ensure it is still secure and safe to use.

By admin