Are you tired of constantly adjusting your TV because it’s placed on a shaky surface or table? Installing a TV wall mount can help solve that problem while also freeing up space in your room. In this article, we’ll go through the steps to install the Omnimount TV wall mount, including choosing the right mount, preparing the wall, and securing the mounting plate.
Choosing the Right Omnimount for Your TV
Before you start the installation process, it’s important to select the Omnimount that’s suitable for your TV’s size and weight. Check your TV’s manual or the manufacturer’s website for its dimensions and weight. Once you have this information, you can choose the Omnimount size that matches it.
Another important factor to consider when choosing an Omnimount is the type of wall you will be mounting it on. Different types of walls require different types of mounting hardware. For example, if you are mounting your TV on a drywall, you will need to use anchors to secure the mount. On the other hand, if you are mounting your TV on a concrete or brick wall, you will need to use masonry screws.
It’s also important to consider the viewing angle when choosing an Omnimount. If you want to be able to adjust the angle of your TV, you should choose a mount that has a tilting or swiveling feature. This will allow you to adjust the angle of your TV to get the best viewing experience. However, if you don’t need to adjust the angle of your TV, a fixed mount will be sufficient.
Tools Needed for Installing Omnimount Wall Mount
Make sure you have all the necessary tools before starting the installation process. You’ll need a drill, drill bits, a stud finder, a level, a pencil or marker, a screwdriver, and a measuring tape. You may also need a wrench or pliers if you’re attaching a locking bar.
It’s important to note that the size and weight of your TV will also determine the type of tools you’ll need. For larger TVs, you may need a heavier duty drill and larger screws to securely mount the wall bracket. Additionally, if you’re mounting the TV in a location with limited access to power outlets, you may need an extension cord or power strip to ensure the TV is properly powered. Always double check the manufacturer’s instructions and recommendations before beginning the installation process.
Preparing the Wall for Installation
Clean the wall and remove any debris or dust. Use a stud finder to locate the wall studs, which will support the TV and mounting bracket. Mark the stud locations with a pencil.
Next, measure the distance between the studs to ensure that the mounting bracket will fit properly. If the distance is too wide, you may need to use a mounting plate to span the gap between the studs. If the distance is too narrow, you may need to drill new holes in the bracket to align with the studs.
Before drilling any holes, double-check the placement of the bracket and TV to ensure that it will be at the desired height and angle. It may be helpful to use a level to ensure that the bracket is straight. Once you have confirmed the placement, use a drill to attach the bracket to the wall studs, making sure to use screws that are long enough to securely hold the weight of the TV.
Measuring and Marking the Wall for Omnimount Wall Mount
Measure and mark the height of where you want to hang the TV on the wall, and make a vertical line using a level. Mark the center point of where the mount will be attached to the wall.
Next, use a stud finder to locate the studs in the wall. It is important to attach the mount to the studs for maximum stability and safety. Mark the center of each stud with a pencil.
Before drilling any holes, double-check the measurements and make sure the mount is level. Use a drill bit that is slightly smaller than the screws provided with the mount to drill pilot holes into the center of each stud. Then, attach the mount to the wall using the screws and a screwdriver or drill.
Drilling Holes in the Wall for Omnimount Wall Mount
Drill pilot holes for the screws or bolts to ensure the Omnimount mounting plate is secured to the wall studs. Use a drill bit that’s slightly smaller than the screws or bolts you’re using.
Before drilling, make sure to locate the wall studs using a stud finder. This will ensure that the mounting plate is securely attached to the wall and can support the weight of the TV or other device being mounted.
It’s also important to consider the placement of the mounting plate. Make sure it’s at a comfortable viewing height and centered on the wall. Take into account any furniture or other obstacles that may affect the placement.
Securing the Mounting Plate to the Wall for Omnimount Wall Mount
Attach the mounting plate to the wall using the appropriate screws or bolts and your drill or screwdriver. Make sure the plate is level.
It is important to ensure that the wall you are attaching the mounting plate to is strong enough to support the weight of the TV or other device you will be mounting. If you are unsure, consult a professional or use a stud finder to locate the studs in the wall for added support. Additionally, be sure to follow the manufacturer’s instructions for the specific Omnimount wall mount you are using to ensure proper installation and safety.
Attaching the Arms to the TV and Mounting Plate for Omnimount Wall Mount
Attach the arms to the mounting plate and the back of the TV with the provided screws or bolts and a screwdriver. Use a pliers or wrench to secure the locking bar if required.
Before attaching the arms to the TV and mounting plate, make sure to check the weight capacity of the wall mount and ensure that the TV does not exceed it. It is also important to locate the studs in the wall and use them as the anchor points for the wall mount to ensure stability and safety.
Once the arms are securely attached to the TV and mounting plate, carefully lift the TV and align the mounting plate with the wall mount. Use a level to ensure that the TV is straight and adjust the arms as necessary. Finally, tighten all screws and bolts to ensure that the TV is securely mounted to the wall.
Hanging the TV on the Omnimount Wall Mount
Carefully lift the TV and hang it on the arms attached to the mounting plate. Ensure it’s level and secure.
It is important to note that the weight of the TV should not exceed the weight limit specified by the Omnimount Wall Mount. Exceeding the weight limit can cause the mount to fail and result in damage to the TV and surrounding area. Additionally, it is recommended to have a second person assist with the installation to ensure safety and accuracy.
Adjusting the Tilt and Swivel of Your TV on Omnimount
Omnimount wall mounts offer the flexibility to adjust the tilt and swivel angles of your TV. Adjust the TV to your desired angle by loosening the bolts on the arms and tightening them once you’ve set the angle.
It is important to note that when adjusting the tilt and swivel angles, you should avoid over-tightening the bolts as this can damage the mount and cause it to become unstable. Additionally, make sure to check the weight capacity of your Omnimount wall mount to ensure that it can support the weight of your TV.
If you are unsure about how to adjust the tilt and swivel angles of your TV on Omnimount, refer to the instruction manual that came with your wall mount. The manual will provide step-by-step instructions on how to properly adjust the mount to achieve the desired viewing angle.
Troubleshooting Common Issues with Installing Omnimount Wall Mount
If the mount doesn’t feel secure or leveled, recheck the mounting plate and screws or bolts. Make sure they’re properly attached to the wall studs and the plate is level. If the mount isn’t able to support the TV, check the weight capacity.
If you’re experiencing issues with cable management, make sure to plan ahead and route cables before mounting the TV. This will prevent any unnecessary stress on the cables and ensure a clean and organized look. Additionally, if you’re having trouble with the viewing angle, consider using a tilting or articulating mount to adjust the position of the TV.
Tips for Keeping Your TV Securely Mounted on Omnimount
Regularly check the screws and bolts to ensure they’re securely fastened to the wall and mounting plate. Avoid placing any heavy or sharp objects close to the TV that can damage the mount or cause it to sag.
With these steps, you should be able to install and enjoy your TV securely mounted with the Omnimount wall mount.
Another important tip is to make sure that the wall you’re mounting the TV on is sturdy enough to support the weight of the TV and the mount. If the wall is weak or made of a material that cannot support the weight, it can cause the mount to come loose and the TV to fall.
Additionally, it’s important to follow the manufacturer’s instructions carefully when installing the mount. This will ensure that the mount is installed correctly and securely, reducing the risk of any accidents or damage to your TV.