So, you’ve just purchased a full motion TV mount from Stanley and now you’re wondering how to install it properly. Fear not, because this article will guide you step-by-step on how to install your mount with ease. By following these instructions, you can enjoy your favorite shows and movies from almost any angle in your living room.
Tools Required for Installing a Full Motion TV Mount
Before starting the installation process, it’s essential to have the necessary tools at hand. You will need a power drill with a suitable drill bit, a Phillips head screwdriver, a stud finder, a level, a tape measure, and mount screws.
In addition to the tools mentioned above, it’s also recommended to have a pencil, a hammer, and a wrench. The pencil will be used to mark the spots where you will drill the holes, the hammer will be used to gently tap the anchors into the wall, and the wrench will be used to tighten any bolts or screws that may need adjusting during the installation process.
Understanding the Different Types of TV Mounts
Full motion TV mounts are one of the most versatile types of mounts available, as they allow you to adjust your TV’s angle and rotation to your desired viewing direction. They are perfect for large living rooms, allowing you to enjoy your TV from different corners of the room, such as the kitchen or play area.
Another type of TV mount is the fixed mount, which is ideal for smaller rooms or spaces where you have a designated viewing area. Fixed mounts keep your TV securely in place and are typically the most affordable option. They are also great for reducing glare and providing a sleek, low-profile look. However, they do not offer the flexibility of full motion mounts.
Choosing the Right Spot to Mount Your TV
Choosing the right spot to mount your TV is crucial because you don’t want it to become a nuisance to your daily activities. First, determine the dimensions of your living room and where your TV will be positioned. Secondly, you will also want to take into account the position of windows, walls, and available electrical outlets. Once you have determined the perfect spot, measure and mark the spot where the mount will be installed.
Another important factor to consider when choosing the right spot to mount your TV is the viewing angle. You want to make sure that the TV is mounted at a height and angle that is comfortable for everyone who will be watching it. This means that the TV should be mounted at eye level when you are seated in your usual viewing spot.
It is also important to consider the type of wall you will be mounting your TV on. If you are mounting it on a drywall, you will need to use anchors to ensure that the mount is secure. If you are mounting it on a brick or concrete wall, you will need to use a masonry bit to drill the holes for the anchors.
Measuring and Marking the Wall for Installation
Using a stud finder, locate the studs behind the wall where the mount will be installed. Mark the location with a pencil, and then use a level to ensure that the mount will be installed evenly.
It is important to also consider the weight and size of the mount and the TV or object being mounted. Make sure to choose appropriate hardware and anchors that can support the weight and size of the mount and TV. It is recommended to consult the manufacturer’s instructions or a professional installer for guidance on selecting the right hardware and anchors for your specific mount and TV.
Drilling Holes and Installing the Wall Plate
After marking the spot for the wall plate, drill holes into the wall using a power drill with a suitable drill bit. Insert wall anchors into the drilled holes before attaching the wall plate to the wall. We recommend using a power drill to screw in the mount screws for better accuracy and stability.
It is important to ensure that the wall plate is level before attaching it to the wall. You can use a spirit level to check this. Additionally, make sure that the wall plate is securely attached to the wall to prevent any accidents or damage to the mounted object. If you are unsure about the installation process, it is recommended to seek professional help.
Attaching the Arms to the Wall Plate
Once the wall plate is attached, you can then attach the arms to the wall plate. Typically, this will involve inserting bolts through the wall plate and into the arms.
Before attaching the arms to the wall plate, it is important to ensure that the arms are level and evenly spaced. This can be done by using a level and measuring tape. Once you have determined the correct placement, mark the spots where the bolts will be inserted.
When inserting the bolts, make sure they are tightened securely to prevent the arms from becoming loose over time. It is also recommended to periodically check the bolts to ensure they remain tight and secure.
Securing the TV Bracket to Your Television
Before attaching the TV bracket to your TV, make sure to check if it is compatible with your TV model. To attach the bracket securely, attach the corresponding TV screws to the back of your television.
It is important to ensure that the TV bracket is level and straight before attaching it to your television. Use a level tool to ensure that the bracket is straight and adjust it accordingly. Once the bracket is level, attach it to the TV screws on the back of your television.
After securing the TV bracket to your television, make sure to test it by gently pulling on the TV to ensure that it is securely attached. It is also important to periodically check the bracket and screws to ensure that they are still secure and have not become loose over time.
Attaching the TV Bracket to the Arms on the Wall Plate
Once the bracket is attached to the television, you can then attach it securely on to the arms on the wall plate. This process may vary depending on the model of your mount. Be sure to read the instructions carefully.
It is important to ensure that the arms on the wall plate are level and securely attached to the wall before attaching the bracket. Use a level to ensure that the arms are straight and adjust as necessary. Once the arms are level, use a drill and screws to securely attach the arms to the wall. This will provide a stable base for the bracket and prevent any accidents or damage to your television.
Adjusting Your TV’s Viewing Angle with a Full Motion Mount
You can now adjust your TV’s viewing angle freely, forward or backward, left or right. You can also adjust it vertically to ensure that the TV is level. Make sure that your TV will not collide with any other objects in the room or cause any obstruction.
It is important to note that when adjusting your TV’s viewing angle with a full motion mount, you should take into consideration the lighting in the room. If there is a window or light source behind the TV, it may cause glare or reflections on the screen. Adjust the angle of the TV to minimize any unwanted reflections or glare for the best viewing experience.
Tips and Tricks for Hiding Cables and Wires After Installation
It’s best to hide the TV cables and wires after installation for a cleaner appearance. In-wall cable management products are available online, which allows you to hide cables in the wall cavity. Alternative methods include using cable ties and cable covers to secure the wires neatly along the wall.
Another option for hiding cables and wires is to use furniture to conceal them. For example, you can place a decorative box or basket near the TV stand to hide the cables and wires. Additionally, you can use furniture with built-in cable management, such as a TV stand with a cable management system or a desk with cable routing holes. These options not only hide the cables but also add to the overall aesthetic of the room.
Troubleshooting Common Problems When Installing a Full Motion TV Mount
If you’re having any issues during installation or even after installation, you can contact Stanley’s customer service for help. Common issues might include wall plate compatibility with the TV mount, brackets that don’t fit your TV, or even loose screws that require tightening. Stanley customer service is always happy to help with any issues.
Overall, by following these guidelines, you’ll be able to install a full-motion TV mount with ease. It’s important to follow each instruction step by step for stability and durability of your TV mount. Remember to always double-check before drilling for holes, to prevent any unnecessary damage or repairs.
One additional tip to keep in mind is to make sure that the TV mount is installed on a sturdy and secure wall. If the wall is not strong enough to support the weight of the TV and mount, it can lead to the mount becoming loose or even falling off the wall. It’s always a good idea to use a stud finder to locate the strongest part of the wall and install the mount there. If you’re unsure about the strength of your wall, it’s best to consult with a professional before proceeding with the installation.