A wall with a flat-screen tv mounted on it using a sanus full motion mount

Installing a Sanus Full Motion TV mount can seem daunting at first, but with the right tools and instructions, it can be a fairly straightforward process. In this guide, we will walk you through every step of the installation process, from unboxing the mount to adjusting and testing the final product. With our detailed guide, you’ll have your TV up and mounted in no time!

Unboxing the Sanus Full Motion TV Mount

The first step in installing your Sanus Full Motion TV mount is to unbox the product and ensure that all the required components are included. Inside the box, you should find the wall plate, TV bracket, mounting hardware, level, and installation instructions. It is important to make sure that all the components are in good condition and free from damage before proceeding.

Once you have confirmed that all the components are present and in good condition, you can begin the installation process. The first step is to attach the wall plate to the wall using the provided mounting hardware. It is important to ensure that the wall plate is level and securely attached to the wall before proceeding.

See also  Are projectors good in daylight?

Next, you will need to attach the TV bracket to the back of your TV. Make sure to use the appropriate screws and follow the instructions carefully to avoid damaging your TV. Once the TV bracket is securely attached to the TV, you can then attach it to the wall plate using the provided hardware. Finally, adjust the mount to your desired viewing angle and enjoy your newly mounted TV!

Tools Required for Installing Sanus Full Motion TV Mount

Before you start the installation process, it is important to gather all the necessary tools and equipment. The tools required for installing a Sanus Full Motion TV mount include a drill, stud finder, screwdriver, measuring tape, and a pencil. Additionally, you may need a socket wrench, depending on the mounting hardware.

It is also recommended to have a level on hand to ensure that the TV mount is installed straight. If you are mounting the TV on a brick or concrete wall, you will need a masonry bit for drilling into the wall. It is important to have all the necessary tools before starting the installation process to avoid any delays or complications.

Step-by-Step Guide to Install Sanus Full Motion TV Mount

Now that you have all the necessary tools and equipment, it’s time to begin the installation process. Follow these simple steps:

Step 1: Preparing the Wall for Sanus Full Motion TV Mount Installation

The first step is to locate the wall studs where you will mount your TV. Using a stud finder, locate two studs where you want to mount the TV, and mark the center of each one with a pencil. Make sure that the two marks are level with each other and evenly spaced apart. Then, hold up the wall plate to your marks and ensure that the holes align with the center of your marked studs.

See also  How to Wall Mount a 65 Inch Tv

Step 2: Selecting the Right Spot and Height for Sanus Full Motion TV Mount

Before you drill any holes, make sure to select the right spot and height for your TV mount. Consider the room layout and the viewing angle you want to achieve. Make sure the mount is level and straight before proceeding. Measure twice, drill once.

Step 3: Attaching the Wall Plate to the Wall for Sanus Full Motion TV Mount

Now that you have your markings in place, drill pilot holes in the center of the marks, making sure to use a drill bit that is slightly smaller than the diameter of the mounting screws. Then, attach the wall plate to the wall, using the screws that came with the mount. Make sure to tighten the screws securely and double-check that the wall plate is level.

Step 4: Attaching the Bracket to the Back of your TV for Sanus Full Motion TV Mount

With the wall plate securely in place, it’s time to attach the bracket to the back of your TV. The bracket should come with screws and washers that fit your TV’s VESA pattern. Make sure to follow the manufacturer’s instructions for the bracket attachment and be cautious when physically engaging with the TV.

Step 5: Securing your TV onto the Sanus Full Motion TV Mount

With both the wall plate and bracket in place, it’s now time to mount your TV onto the Sanus Full Motion TV mount. This step will require assistance, and should be completed very carefully without rushing. Lift the TV and attach the bracket to the wall plate. Ensure that the bracket is securely fixed onto the wall plate before proceeding to tightening the screws.

See also  How to Use Insignia Fixed Tv Mount

Step 6: Testing the Sanus Full Motion TV Mount

After securing your TV onto the mount, it’s important to test the mount’s stability and ensure that it can hold the weight of your TV. Gently push and pull the TV to make sure it’s securely attached to the mount. Test the mount’s full range of motion to ensure that it moves smoothly and without any resistance. If you notice any issues, double-check the installation steps and make any necessary adjustments.

Adjusting and Testing your Sanus Full Motion TV Mount

With your TV now securely mounted on the Sanus Full Motion TV mount, it’s important to test the mount’s flexibility to ensure that it is functioning correctly. Through a series of small adjustments, you should be able to test the viewing angle and range of movement of your TV with ease.

One important thing to keep in mind when adjusting your Sanus Full Motion TV mount is to make sure that the mount is properly installed on a sturdy wall or surface. This will ensure that your TV remains safe and secure while adjusting the mount’s flexibility. Additionally, it’s recommended to periodically check the mount’s screws and bolts to ensure that they are tightened properly and that the mount remains stable over time.

Tips and Tricks for Properly Installing the Sanus Full Motion TV Mount

When installing your Sanus Full Motion TV mount, make sure to use high-quality mounting hardware and accessories. Always read the manufacturer’s manual to ensure that you are following the correct installation process. A properly installed mount can make a big difference and provide long-lasting support for your TV.

By following our step-by-step guide above, installing a Sanus Full Motion TV mount should be a manageable task that will allow you to enjoy your TV in a comfortable and secure manner. Good luck!

It is important to note that the weight and size of your TV will determine the type of mount you need. Make sure to choose a mount that is compatible with your TV’s weight and size to ensure proper support. Additionally, consider the placement of the mount and the viewing angle you desire. A full motion mount allows for greater flexibility in adjusting the viewing angle, but may require more space and a more complex installation process.

Finally, it is recommended to have a second person assist with the installation process, especially when mounting larger TVs. This can help ensure that the mount is level and properly secured to the wall. With these tips in mind, you can confidently install your Sanus Full Motion TV mount and enjoy your TV in a comfortable and secure manner.

By admin