Are you tired of your TV taking up valuable floor space in your living room? If so, it’s time to install an Invision TV mount. Not only will this free up space, but it will also give your entertainment area a clean, modern look. In this article, we’ll go through all the steps necessary to install your Invision TV mount accurately.
Gather the Required Tools and Equipment
Before you start your Invision TV mount installation, gather all the necessary tools and equipment. The basic toolkit includes a power drill, a stud finder, a spirit level, a pencil, a tape measure, a screwdriver, and screws of various sizes. Make sure all your tools are in good condition, and keep them handy throughout the installation process for easy access.
In addition to the basic toolkit, you may also need a hammer, a wrench, and a cable management kit to organize the cords and cables behind your TV. It’s important to have all the necessary tools and equipment before starting the installation to avoid any delays or interruptions during the process.
Choose the Right Invision TV Mount for Your TV
Next, you need to select the Invision TV mount that’s right for your TV. Invision offers different models to accommodate various sizes and weights of TVs. Before making your purchase, check your TV’s manual to find its VESA (Video Electronics Standards Association) measurements, which indicate the distance between the mounting holes on the back of your TV. Ensure that the Invision TV mount you select is compatible with your TV’s VESA measurements.
Another important factor to consider when choosing an Invision TV mount is the type of wall you will be mounting it on. Invision offers mounts that are compatible with different types of walls, such as drywall, concrete, and brick. Make sure to select a mount that is appropriate for the type of wall you will be using.
Additionally, think about the viewing angle you want for your TV. Invision offers mounts that allow for tilting and swiveling, which can be useful if you want to adjust the angle of your TV for different viewing positions. Consider where you will be sitting in relation to the TV and choose a mount that will provide the best viewing experience for you and your family.
Preparing Your Wall for Installation
Before you begin drilling holes, it is essential to prepare your wall for the installation. This involves clearing any obstacles from the area where you plan to install your Invision TV mount, such as furniture and decorations. Then, use the stud finder to locate the wooden studs behind the drywall. These studs provide a sturdy anchor for your TV mount and ensure a stable installation. Finally, clean the wall surface where the mount will be attached thoroughly.
It is also important to consider the weight and size of your TV when preparing your wall for installation. Make sure to choose a mount that can support the weight and size of your TV, and ensure that the mount is properly secured to the studs. Additionally, if you are unsure about the installation process or do not have the necessary tools, it is recommended to seek professional installation services to ensure a safe and secure installation.
Finding the Right Spot to Mount Your TV
Once your wall is prepared, you now need to find the right spot to mount your TV. Consider factors such as ambient light, seating position, and viewing angle, to select the ideal location. Use a piece of paper cut to your TV’s dimensions to create a mockup of the TV on your wall. This helps you visualize the final placement of your TV to determine if it’s the right spot.
Another important factor to consider when finding the right spot to mount your TV is the height at which it will be mounted. The ideal height for your TV will depend on the size of your TV and the height of your seating area. As a general rule, the center of your TV screen should be at eye level when you are seated. This will ensure that you have a comfortable viewing experience without straining your neck.
It’s also important to consider the location of your power outlet and cable connections when selecting the spot to mount your TV. You want to make sure that your TV is close enough to these connections to avoid unsightly cords and cables running across your wall or floor. If your power outlet and cable connections are not in the ideal location, you may need to hire a professional to install new outlets or run cables through your walls.
Marking the Drill Holes for Installation
With the location of your TV mount cleared, it’s time to mark the spots where you’ll drill the holes. Use the spirit level to ensure that the mount is level, then mark the spots using the pencil. Remember to mark the holes on the wooden studs for maximum support.
It’s important to take into consideration the weight of your TV when marking the drill holes. If you have a larger TV, it’s recommended to use more than two screws to secure the mount. Additionally, if you’re unsure about the location of the wooden studs, you can use a stud finder to locate them accurately. Once you’ve marked the spots, double-check the measurements before drilling to avoid any mistakes.
Drilling the Holes in the Wall
Now that you have defined your drilling spot, it’s time to drill the holes in the wall. Use the appropriate drill bit for the screws you will use and make sure you drill straight and perpendicular to the wall. Be sure to drill into the center of the marked spots and ensure that the depth of the hole is sufficient to accommodate the TV mount’s screws.
It’s important to note that if you’re drilling into a concrete or brick wall, you’ll need a hammer drill to make the holes. Additionally, if you’re unsure about the location of any electrical wires or plumbing behind the wall, it’s best to use a stud finder or consult a professional before drilling.
After drilling the holes, use a vacuum or brush to remove any debris from the holes. Then, insert wall anchors into the holes to provide extra support for the screws. Finally, attach the TV mount to the wall by screwing it into the anchors, making sure it’s level and secure before mounting the TV.
Installing the Invision TV Mount Bracket on the Wall
With the holes drilled, attach the Invision TV mount bracket securely to the wall using the screws provided. Use the spirit level to make sure that the bracket is level and secure.
Once the bracket is securely attached to the wall, it’s time to mount the TV onto the bracket. Make sure to have a second person assist you with this step, as TVs can be heavy and difficult to maneuver alone. Carefully lift the TV and align the mounting holes on the back of the TV with the corresponding holes on the bracket.
Once the TV is aligned with the bracket, use the screws provided to attach the TV to the bracket. Make sure to tighten the screws securely, but be careful not to over-tighten them, as this can damage the TV. Once the TV is securely mounted, use the spirit level again to ensure that it is level and adjust as necessary. Congratulations, you have successfully installed your Invision TV mount bracket!
Attaching the VESA Mounting Plate to Your TV
With the TV mount bracket installed, it’s time to attach the VESA mounting plate to your TV. Locate the VESA mounting holes on the back of your TV and attach the mounting plate using the screws provided. Be sure to tighten the screws securely, but don’t over-tighten them, as this can damage the TV.
It’s important to note that not all TVs have VESA mounting holes. If your TV doesn’t have these holes, you may need to purchase an adapter or a different type of mounting bracket. Make sure to check your TV’s specifications before purchasing a mount.
Additionally, when attaching the VESA mounting plate, make sure to use the correct screw size and length. Using the wrong screws can also cause damage to your TV. Refer to the instructions provided with your mount or consult with a professional if you’re unsure about which screws to use.
Securing Your TV to the Invision TV Mount Bracket
Now that both the wall bracket and mounting plate are securely in place, it’s time to mount your TV. Carefully lift the TV and attach it to the VESA mounting plate using the screws provided. Remember to double-check the screws to ensure they’re secure.
It’s important to note that the weight of your TV should not exceed the weight limit specified by the Invision TV mount bracket. Exceeding the weight limit can cause the bracket to fail and potentially damage your TV or injure someone. Additionally, make sure to follow the manufacturer’s instructions for properly positioning and adjusting the TV on the mount to avoid any strain on the bracket or the wall. By taking these precautions, you can enjoy your TV securely mounted on the wall for years to come.
Adjusting Your TV’s Viewing Angle on the Invision TV Mount Bracket
With your TV mounted, you can now adjust its viewing angle to your preference. Invision TV mounts allow for tilting and swiveling, so you can achieve the perfect viewing angle. Adjust the TV’s angle carefully, as abrupt movements can cause the TV to fall or tilt off balance.
Hiding Cables and Wires After Installation
If you’re a fan of a clean and pristine look, you’ll want to hide the cables and wires after installation. Simply run the cables through the cable channels provided on the Invision TV mount bracket and route them down the wall to your TV’s peripheral devices.
Testing Your Mounted TV for Stability and Safety
Before switching on your TV, give it a final check to ensure stability and safety. Use a spirit level to check the TV’s levelness, and test the mount’s stability by pulling lightly on the TV from different angles. It should feel secure and stable in all positions.
Troubleshooting Common Issues During Invision TV Mount Installation
If you experience any issues during the installation process, consult the user manual for troubleshooting tips. If the problem persists, contact Invision customer service for assistance.
Tips for Maintaining Your Invision TV Mount Over Time
Finally, it’s essential to maintain your Invision TV mount periodically. Check that all screws are tight, and cables are still properly routed regularly. Clean the mount and TV with a soft cloth to remove any dust and grime buildup. With proper maintenance, your Invision TV mount will provide years of reliable service.
By following these instructions, you’ll have your Invision TV mount installed in no time. Enjoy your newfound space and sleek entertainment area, and keep in mind that you can always count on the durability and reliability of Invision TV mounts for future installations.