A wall with a fleximount tv mount installed

Are you looking to install a wall mount for your television? Look no further than the Fleximount TV Mount. With some basic tools and a little effort, installing this mount is a simple and straightforward process. In this article, we’ll guide you through each step of the installation process, from gathering your tools to troubleshooting any issues that may arise.

Gathering Required Tools and Equipment

Before you begin installation, ensure that you have all the necessary tools and equipment. You’ll need a drill, screwdriver, level, measuring tape, stud finder, and of course, your Fleximount TV Mount kit. Make sure that you have the correct size and type of mount for your television before starting the installation process. It’s also a good idea to have a helper on hand to assist with holding the TV during installation.

In addition to the basic tools and equipment, you may also need some additional items depending on the specific installation requirements. For example, if you’re mounting the TV on a brick or concrete wall, you’ll need a masonry drill bit and anchors. Similarly, if you’re mounting the TV above a fireplace, you may need a heat-resistant mount and cable management system to ensure that the cables don’t get damaged by the heat.

Before you start drilling any holes, it’s important to locate the studs in the wall to ensure that the mount is securely attached. You can use a stud finder to locate the studs, or if you don’t have one, you can tap the wall and listen for a solid sound, which indicates the presence of a stud. Once you’ve located the studs, mark their positions on the wall using a pencil or masking tape.

Choosing the Right Location for Your TV Mount

Choosing the right location for your TV mount is crucial to ensure it’s both safe and functional. Start by finding the studs in the wall using a stud finder. In general, it’s best to mount your television so that it’s at eye level when seated, and make sure that there’s enough distance between the TV and seating area for comfortable viewing. You’ll also want to ensure that there are no obstructions or potential hazards near the mount, such as doors or windows.

Another important factor to consider when choosing the location for your TV mount is the lighting in the room. Avoid mounting your TV in a spot where there is direct sunlight or glare from windows, as this can cause eye strain and make it difficult to see the screen. Additionally, if you plan on watching TV in the evening or at night, make sure the room has adequate lighting to avoid eye strain and discomfort. Consider installing dimmer switches or adjustable lighting to create a comfortable viewing environment.

See also  What type of projector is best for outdoors?

Measuring and Marking the Mounting Bracket

Using your measuring tape and level, mark the location of the mount on the wall. Be sure to double-check the placement before drilling any holes. Once you have your markings in place, use a drill bit that matches the size of the screws included with the mount to drill pilot holes into the studs.

Before drilling any holes, it’s important to consider the weight of the object you’ll be mounting. If it’s particularly heavy, you may need to use additional hardware or anchors to ensure it stays securely in place. You can find weight limits and recommended hardware in the instructions that came with your mount.

Once you’ve drilled your pilot holes, hold the mounting bracket up to the wall and use your drill to screw it into place. Make sure it’s level and flush against the wall. If you’re mounting something that requires multiple brackets, repeat the process for each one, making sure they’re evenly spaced and level with each other.

Drilling Holes for the Mounting Bracket

Using the pilot holes as a guide, drill the appropriate holes into the studs to mount the bracket. It’s essential to ensure that these holes are straight and level, so take your time and use your measuring tape and level to double-check your work as you go.

It’s also important to use the correct drill bit size for the screws you will be using to secure the bracket to the wall. Using a drill bit that is too small can cause the screws to loosen over time, while using a drill bit that is too large can weaken the structure of the wall. Refer to the manufacturer’s instructions or consult with a hardware specialist to determine the appropriate drill bit size for your specific mounting bracket and screws.

Installing the Mounting Bracket on the Wall

With the holes drilled, it’s time to attach the mounting bracket to the wall using the screws provided with the mount. It’s important to tighten these screws firmly, as the bracket will be supporting the weight of your television. Double-check that the bracket is level before moving on to the next step.

It’s also a good idea to use a level to ensure that the bracket is straight. If the bracket is not level, your TV may hang crookedly, which can be both unsightly and potentially dangerous. Once you’ve confirmed that the bracket is level, you can move on to attaching the TV to the bracket.

See also  How to Mount Curved 65" Tv

Attaching the Wall Plate to the TV

With the bracket securely attached to the wall, it’s time to attach the wall plate to the back of your television. Use the appropriate screws for your television’s VESA pattern, which should be listed in the user manual. Many TVs come with these screws included in the box.

Before attaching the wall plate to the TV, make sure to have someone assist you in holding the television steady and in the correct position. It’s important to ensure that the TV is level and centered on the bracket before tightening the screws. Once the wall plate is securely attached to the back of the TV, carefully lift the TV and hang it onto the bracket on the wall. Double-check that the TV is level and secure before letting go.

Securing the TV onto the Mounting Bracket

With the wall plate securely attached to your TV, it’s time to hang the television onto the mounting bracket. With the help of your helper, carefully lift the TV onto the bracket and position it securely in place. Many Fleximount TV Mounts come with safety screws or other locking mechanisms to ensure that the TV does not accidentally come loose from the mount.

Before securing the TV onto the mounting bracket, it’s important to ensure that the bracket is properly installed onto the wall. Make sure that the bracket is level and securely attached to the wall studs or anchors. If the bracket is not installed correctly, it can cause the TV to become unstable and potentially fall off the wall.

Once the TV is securely attached to the mounting bracket, you may want to adjust the viewing angle. Many Fleximount TV Mounts allow for tilting and swiveling, so you can find the perfect viewing position. Be sure to test the stability of the TV after making any adjustments to the angle, to ensure that it remains securely attached to the mount.

Concealing Cables and Wires

No one wants a mess of cables and wires hanging down from their wall-mounted television. Fortunately, there are several ways to conceal these cables. Wall-mounted channel systems or in-wall cord kits can help hide cables and ensure that your installation looks clean and professional.

Another option for concealing cables is to use cable sleeves or zip ties to bundle and hide them behind furniture or along the baseboards. This is a great solution for those who don’t want to make any permanent changes to their walls.

It’s important to note that when concealing cables, safety should always be a top priority. Make sure to follow manufacturer instructions and use appropriate materials to avoid any potential fire hazards.

Testing Your Fleximount TV Mount for Stability and Safety

Once your television is securely mounted, it’s time to test the stability and safety of your installation. With the help of your helper, gently push and pull the TV to ensure that it’s firmly attached to the mount. Check to make sure that all safety screws or other locking mechanisms are securely in place.

See also  How to Mount a Large Tv by Yourself

It’s also important to check the weight capacity of your Fleximount TV mount to ensure that it can support the weight of your television. Refer to the manufacturer’s instructions or website to find the weight limit for your specific model. If your TV exceeds the weight limit, it’s important to upgrade to a stronger mount to prevent any accidents or damage to your TV.

Troubleshooting Tips for Common Installation Issues

Despite your best efforts, sometimes issues can arise during the installation process. If you encounter any problems, such as difficulty finding wall studs, or if your TV is not level, there are several troubleshooting tips available. Refer to your user manual for troubleshooting tips and contact Fleximount customer support if necessary.

One common issue that can occur during installation is the inability to securely mount the TV to the wall. This can be caused by a variety of factors, such as an uneven wall surface or incorrect screw size. To troubleshoot this issue, try using a stud finder to locate the wall studs and ensure that you are using the correct screws for your TV mount. If the issue persists, consider consulting with a professional installer.

Another issue that may arise is difficulty with cable management. If you find that your cables are tangled or not neatly organized, there are several solutions available. One option is to use cable ties or clips to secure the cables to the wall or TV mount. Alternatively, you can purchase a cable management kit that includes adhesive clips and covers to hide the cables from view. By addressing cable management issues, you can ensure that your installation looks clean and professional.

Maintenance Tips for Your Fleximount TV Mount

Regular maintenance of your Fleximount TV Mount can help ensure that it continues to work properly and safely. Every few months, check that all screws and bolts are securely tightened and that the mount is level. Keep the mount clean and free of dust and debris.

In conclusion, installing a Fleximount TV Mount is a simple process that can be accomplished by anyone with the right tools and a little time and effort. By following the steps outlined in this article, you can safely and securely mount your television on your wall for easy viewing and a clean, professional look.

Another important maintenance tip for your Fleximount TV Mount is to regularly inspect the cables and wires that connect your television to the mount. Make sure that they are not frayed or damaged in any way, as this can cause a safety hazard. If you notice any damage, replace the cables immediately.

Additionally, if you live in an area that experiences earthquakes or other natural disasters, it is important to regularly check the stability of your Fleximount TV Mount. Consider investing in earthquake-resistant hardware to ensure that your mount stays securely attached to the wall during a seismic event.

By admin