Are you thinking of removing your Sanus TV wall mount from your wall? Maybe you’re moving house or upgrading to a new TV. Whatever the reason, it is essential to do it safely to avoid damaging your TV or wall. In this article, we will guide you step-by-step on how to remove a Sanus TV wall mount correctly.
Why do you need to remove a Sanus TV wall mount?
If you’re moving into a new house, the previous owner may have left a Sanus TV wall mount in place. Or, maybe you’re upgrading your TV and need to remove the old mount. Whatever the reason, it’s essential to do it safely to avoid costly damages.
Additionally, removing a Sanus TV wall mount can also be necessary if you need to make adjustments to the positioning or angle of your TV. This is especially important if you want to avoid glare or improve the viewing experience in your room. By removing the mount, you can make the necessary adjustments and reinstall it securely to ensure your TV is in the perfect position.
Preparing to remove the Sanus TV wall mount
Before getting started, it’s essential to prepare your workspace and acquire the necessary tools. You will need a level, screwdrivers, a socket wrench kit, a stud finder, a pencil, and a helper. Ensure you have enough space to work in and that you can access the entire area around the mount.
It’s also important to note that you should turn off and unplug any electronics connected to the TV before removing the wall mount. This will prevent any potential damage to the devices and ensure your safety during the process. Additionally, it’s a good idea to have a soft surface, such as a blanket or towel, nearby to place the TV on once it’s removed from the mount.
Understanding the components of the Sanus TV wall mount
It’s crucial to understand the components of your wall mount before beginning to remove it. Your Sanus wall mount will consist of two brackets, one attached to the TV and the other attached to the wall. Between them is an arm that supports the TV while allowing you to tilt and swivel it. The wall bracket attaches to the wall studs while the TV bracket attaches to the VESA mounting holes on the TV’s back.
Additionally, the Sanus TV wall mount may also come with various screws, bolts, and washers to secure the brackets and arm in place. It’s important to use the correct hardware and follow the manufacturer’s instructions carefully to ensure a safe and secure installation. Some Sanus wall mounts may also include cable management clips or channels to help organize and conceal cables for a clean and professional look.
Step-by-step instructions for removing the Sanus TV wall mount
Follow these steps to safely remove your Sanus TV wall mount:
- First, remove the TV from the mount. Unscrew the safety screws and lift the TV off the mount.
- Next, locate the stud nearest to the mount and mark it clearly with a pencil.
- Then, use the socket wrench to remove the lag bolts connecting the mount to the wall.
- Once you disconnect the wall bracket from the studs, you can disconnect the arm from it.
- Finally, remove the TV bracket from your TV’s backplate.
It is important to note that before removing the Sanus TV wall mount, you should ensure that the TV is turned off and unplugged from the power source. Additionally, it is recommended to have a second person assist you in removing the mount, as it can be heavy and difficult to handle alone. Once the mount is removed, be sure to store all the screws and bolts in a safe place for future use.
Removing the TV from the Sanus wall mount
You might need to remove the TV from the mount before disconnecting it, especially when upgrading to a new TV. Here are the steps:
- First, check the manual to know the TV bracket’s weight capacity and ensure that your TV falls within the limit.
- Then, unscrew the safety screws on top of the TV bracket with a screwdriver to release the lock mechanism.
- Next, lift the TV gently but confidently upwards and off the bracket.
It is important to note that before removing the TV from the mount, you should unplug all cables and cords connected to the TV. This will prevent any damage to the TV or the cables during the removal process. Additionally, it is recommended to have a second person assist you in lifting the TV off the mount to ensure a safe and secure removal.
Tips for safely removing a Sanus TV wall mount
When removing your Sanus wall mount, safety is paramount. Here are a few tips to help you do it safely:
- Follow the manufacturer’s instructions regarding the weight capacity of the bracket.
- Always have a helper to assist you while removing the mount.
- Use the right tools and ensure you have enough space to work in.
- Wear protective gear like gloves and goggles to avoid injury while removing the mount.
It is important to note that before removing the Sanus wall mount, you should first disconnect all cables and wires connected to the TV. This will prevent any damage to the TV or the cables during the removal process.
Additionally, if you are unsure about how to safely remove the wall mount, it is recommended that you seek the assistance of a professional. They will have the necessary expertise and tools to safely remove the mount without causing any damage to your TV or wall.
How to avoid damaging your TV or wall during removal
You must be gentle while removing the mount to avoid damaging your TV or wall. Use the following tips to avoid damaging your TV or wall:
- Be mindful of the TV’s weight while removing it from the mount. It’s heavy and can easily fall and cause damage to the wall or get damaged.
- Ensure you have a helper to help you lift the TV off the mount safely.
- Use a leveling tool to ensure that you don’t damage your wall while removing the mount.
- Be careful while removing the bolts to avoid damaging your walls, ceiling, or floor.
Additionally, it’s important to make sure that you have all the necessary tools before attempting to remove the mount. This includes a screwdriver, pliers, and a wrench. Using the wrong tools can cause damage to your TV or wall. It’s also a good idea to read the manufacturer’s instructions for removing the mount, as they may have specific guidelines to follow.
Common mistakes to avoid when removing a Sanus TV wall mount
Here are some common mistakes people make while trying to remove their Sanus TV wall mount:
- Forgetting to remove the TV before removing the wall bracket from the studs.
- Removing the mount without a helper, risking injury or damage to the TV or wall.
- Using the wrong tools when removing the mount, leading to damage and unnecessary delays.
- Ignoring the manufacturer’s instructions regarding the weight capacity of the bracket, leading to damage to the TV or wall.
However, there are a few other mistakes that people often make when removing a Sanus TV wall mount. One of these is failing to properly mark the location of the studs before removing the mount. This can make it difficult to reattach the mount in the same location, and may require additional drilling or patching of the wall.
Another common mistake is not checking the condition of the wall before removing the mount. If the wall is damaged or weakened, removing the mount could cause further damage or even collapse the wall. It’s important to inspect the wall and make any necessary repairs before attempting to remove the mount.
Frequently asked questions about removing a Sanus TV wall mount
Here are some common questions people have about removing their Sanus TV wall mount:
- Do I need to remove the mount before painting the wall? Yes, it’s wise to remove the mount before painting your wall.
- Can I re-use the same mount for my new TV? Yes, as long as the TV falls within the mount’s weight capacity, you can re-use it.
- How do I know which holes to use on the wall mount? Consult the manufacturer’s instructions or seek the advice of a professional installer.
- Can I remove the mount by myself? It’s not advisable. Always have someone assisting you when removing the mount.
There you have it! By following the above steps carefully, you can safely remove your Sanus TV wall mount with ease. Avoid the common mistakes and remember that safety is paramount. If you encounter any hurdles, don’t hesitate to consult a professional installer. Good luck!
It’s important to note that removing a Sanus TV wall mount may require some tools, such as a screwdriver or drill. Make sure you have the necessary tools before attempting to remove the mount. Additionally, if you’re unsure about the weight capacity of your mount, it’s best to err on the side of caution and purchase a new mount that’s compatible with your new TV.
Lastly, if you’re removing the mount because you’re moving to a new home, it’s a good idea to keep the mount and all its components together in a labeled bag or box. This will make it easier to re-install the mount in your new home, or to sell or give away the mount to someone else who may need it.