A tv wall mount with an outlet installed behind it

If you’re looking for a way to clean up the look of your home entertainment setup, one great option is to hide the electrical outlets behind your wall-mounted TV. Not only will this create a sleeker, more professional appearance, but it can also help keep hanging cords and cables out of sight. In this article, we’ll walk you through everything you need to know to safely install an electrical outlet behind your TV wall mount.

Determining the Right Location for Your TV Wall Mount

Before you start any electrical work, it’s important to plan out the location for your TV wall mount. This will help you determine where you need to place the outlet and what materials you’ll need for the job. Keep in mind that it’s typically recommended to mount your TV at eye level while sitting, so be sure to factor in your furniture and room dimensions when choosing a height for the mount.

Another important factor to consider when choosing the location for your TV wall mount is the viewing angle. You want to make sure that the TV is positioned in a way that allows for comfortable viewing from all angles in the room. This may require some experimentation with different heights and angles before settling on the final location.

It’s also important to consider the weight and size of your TV when choosing a location for the wall mount. Make sure that the wall you choose is strong enough to support the weight of the TV and that the mount is compatible with the size and type of TV you have. If you’re unsure about any of these factors, it’s always best to consult with a professional before starting the installation process.

Tools and Materials Needed for Hiding Outlets Behind TV Wall Mount

To install an electrical outlet behind your TV wall mount, you’ll need a few essential tools and materials. These typically include a cable fishing tool, an electrical box, a drywall saw, a screwdriver, and a few screws and bolts. You may also need some wire strippers and electrical tape, depending on the specifics of your setup.

See also  How to Mount a Tv in a Jayco

It’s important to note that before beginning any electrical work, you should always turn off the power to the area you’ll be working in. This can typically be done by flipping the corresponding circuit breaker in your electrical panel. Additionally, if you’re not comfortable working with electricity, it’s best to hire a licensed electrician to do the job for you.

Measuring and Marking the Location of Outlets on the Wall

Once you have your TV wall mount installed and you know where you want to place your outlet, you need to measure and mark the location on the wall. Use a level to ensure that the mark is straight and centered, and then use a pencil to lightly trace the outline of where the outlet box will go.

It’s important to make sure that the outlet is placed at a safe distance from any potential hazards, such as water sources or heat sources. Additionally, consider the height of the outlet and make sure it is easily accessible for plugging and unplugging devices. Once you have marked the location, double-check your measurements before cutting into the wall to install the outlet box.

Cutting a Hole in the Drywall to Accommodate the Outlets

Next, use your drywall saw to carefully cut out the outline you traced. Be sure to work slowly and carefully to avoid damaging surrounding drywall. Once you have the hole cut, use your cable fishing tool to snake a length of wire through the opening and behind the wall. This will allow you to connect the new outlet to an existing source of power.

It is important to note that before cutting into the drywall, you should turn off the power to the room where you will be working. This will prevent any electrical accidents from occurring while you are cutting and installing the new outlet. Additionally, it is a good idea to wear protective gear such as gloves and safety glasses to prevent any injuries from flying debris.

After you have successfully installed the new outlet, it is important to test it to ensure that it is working properly. You can do this by plugging in a small appliance or device and checking to see if it turns on. If it does not work, you may need to double-check your wiring or consult with a professional electrician to troubleshoot the issue.

Running Wires from the Outlet to Behind the TV Wall Mount

Once the cable is run behind the wall, use your wire strippers to remove a small amount of insulation from the end of the wire. Then, attach the wires to the terminals on the back of the new electrical outlet. Be careful to ensure that the wires are properly secured and that there are no loose strands or exposed connectors.

See also  How do you mount a projector to a truss?

It is important to note that running wires behind walls can be a complex and potentially dangerous task. If you are not experienced with electrical work, it is recommended that you hire a professional electrician to handle the installation. This will ensure that the job is done safely and up to code.

Additionally, when running wires behind walls, it is important to consider the type of cable you are using. For example, if you are running HDMI cables for your TV, it is recommended that you use high-speed HDMI cables to ensure the best possible picture quality. Similarly, if you are running Ethernet cables for internet access, you should use Cat6 or Cat7 cables for optimal performance.

Securing Wires to Keep Them Hidden and Secure

Once the new outlet is installed, use zip ties or cable anchors to secure the wiring to the wall. This will help keep everything tidy and prevent any wires from becoming loose or tangled over time. You may want to use a cover plate to give everything a professional-looking finish.

It is important to note that when securing wires, you should avoid over-tightening the zip ties or cable anchors. This can damage the wires and cause them to malfunction. Additionally, make sure to leave enough slack in the wiring to allow for any future adjustments or repairs.

If you are unsure about how to properly secure the wiring, it is always best to consult a professional electrician. They can ensure that everything is installed safely and up to code, giving you peace of mind and avoiding any potential hazards.

Testing and Checking Your Connections Before Finishing Up

Before you finish the project, it’s important to test your new outlet and make sure everything is working properly. Use a voltage tester to check that there is power running to the outlet, and then plug in a simple device (such as a phone charger) to make sure that power is flowing through the outlet and into the device. Once you’re satisfied that everything is working as expected, you can finish the project by installing the cover plate and tidying up any remaining cables or wires.

It’s also a good idea to double-check that all of your connections are secure and properly tightened. Loose connections can cause electrical problems and even pose a safety hazard. Take a few extra minutes to inspect all of the wires and screws, and make sure everything is snug and secure.

If you encounter any issues during the testing process, don’t hesitate to seek help from a professional electrician. Electrical work can be dangerous, and it’s always better to be safe than sorry. A licensed electrician can help you troubleshoot any problems and ensure that your new outlet is installed safely and correctly.

Tips for Concealing Wires and Cables for a Clean, Professional Look

To truly elevate the appearance of your wall-mounted TV setup, consider investing in some cable management solutions. There are a variety of products available to help you hide and organize cables, from cable covers that match your wall color to adhesive clips that can hold cables in place without damaging your walls. You may also want to consider using a wireless HDMI kit to eliminate the need for cables altogether!

See also  How to Fix Tv on Wall Mount

Another option for concealing wires and cables is to use furniture or decor to hide them. For example, you could place a decorative basket or box near your TV stand to hold excess cables and wires. You could also use furniture with built-in cable management, such as a TV stand with a cord organizer in the back. By incorporating these solutions, you can achieve a clean and professional look for your entertainment setup.

What to Do If You Encounter Problems or Difficulties Along the Way

Electrical work can be challenging, and it’s possible that you may encounter problems or complications as you work through this project. If you’re unsure about any steps, or if something seems unusually difficult or dangerous, it’s always best to consult with a professional electrician. Remember, your safety should always come first!

Additionally, it’s important to have a plan in place for any unexpected issues that may arise. This could include having a backup power source available, such as a generator, in case of a power outage. It’s also a good idea to have a fire extinguisher nearby and to know how to use it in case of an electrical fire. By being prepared and taking necessary precautions, you can ensure a safe and successful electrical project.

Common Mistakes to Avoid When Hiding Outlets Behind a TV Wall Mount

There are a few common mistakes that DIYers make when installing electrical outlets behind TV wall mounts. One is not planning out the location of the outlet thoroughly enough before beginning the project. Another is cutting into wires accidentally while running them behind walls or ceilings. You’ll also want to be sure to check that your new outlet is properly grounded and that the wiring is secure and protected from damage.

Additionally, it’s important to consider the type of wall mount being used and the weight of the TV. If the mount is not properly secured to the wall, it can cause damage to the outlet and wiring over time. It’s also important to ensure that the outlet is easily accessible in case of any future maintenance or repairs. Taking the time to plan and execute the installation properly can save you from potential hazards and headaches down the line.

Additional Considerations for Safety and Efficiency When Installing Electrical Outlets Behind a Wall Mount TV.

Installing electrical outlets can be a great way to make your TV setup look cleaner and more professional, but it’s important to keep safety in mind as well. Always make sure that wires and plugs are securely attached to the outlets, and never overload circuits by plugging in too many devices at once. And of course, if you’re ever in doubt about how to safely work with electricity, don’t hesitate to call in a professional.

Conclusion: Enjoy Your New Setup with Hidden Outlets Behind Your TV Wall Mount!

With a little planning and careful work, you can easily hide electrical outlets behind your wall-mounted TV and create a clean, professional look for your entertainment setup. Remember to follow all safety guidelines and take your time during each step of the process. With these tips in mind, you’ll soon be enjoying your favorite shows and movies with a clutter-free, streamlined setup!

By admin