Mounting a television onto furniture is a great way to save space and enhance the aesthetic appeal of your living room or bedroom. But it is essential to perform this task safely and correctly. In this article, we will guide you through the process of mount a TV from furniture using step-by-step instructions and illustrations.
Tools needed to mount a TV from furniture
Before we begin, let us take a look at the tools you will need to mount a TV from furniture. These include:
- Drill (with bits)
- Tape measure
- Cable ties or cord covers
It is important to note that the size and weight of your TV will also determine the type of tools you will need. For larger TVs, you may need a stud finder to locate the wall studs for added support. Additionally, if you are mounting the TV on a brick or concrete wall, you will need a masonry bit for drilling. Always make sure to read the manufacturer’s instructions and follow all safety precautions when mounting a TV.
Understanding the weight capacity of your furniture
The first step in mounting a TV from furniture is to ensure that your furniture can support the weight of your TV. The weight capacity of your furniture can usually be found in the owner’s manual or by contacting the manufacturer.
It is also essential to consider the weight of the TV mount system that you intend to use. The combined weight of the TV and the mount system should not exceed the weight capacity of your furniture.
Another factor to consider when determining the weight capacity of your furniture is the age and condition of the piece. Older or worn furniture may not be able to support as much weight as it once could, and may be more prone to damage or collapse under the weight of a heavy TV.
Additionally, it is important to distribute the weight of the TV evenly across the furniture. Placing the TV on one side of a shelf or stand can cause the furniture to become unbalanced and increase the risk of tipping or damage.
How to find the right wall mount for your TV
The type of wall mount you choose will depend on the size and weight of your TV. There are three types of wall mounts to choose from:
- Fixed mount: This type of mount holds the TV close to the wall and cannot be adjusted.
- Tilting mount: This mount allows you to angle the TV up or down by a few degrees.
- Swivel mount: This type of mount allows you to adjust the TV from side to side and up and down.
Choose a wall mount that matches your TV’s size and weight, and that can attach to your range of furniture types.
It’s also important to consider the viewing angle when choosing a wall mount. If you plan on watching TV from different areas of the room, a swivel mount may be the best option. However, if you have a dedicated viewing area, a fixed or tilting mount may be sufficient. Additionally, make sure to check the VESA (Video Electronics Standards Association) pattern on the back of your TV to ensure compatibility with the wall mount you choose.
Measuring and marking the placement for your TV mount
The next step is to measure and mark the placement for your TV mount. Measure the height and width of the TV, and determine the area where the TV will be mounted. Mark the center of the area with a pencil.
Use a level to ensure that your marks are level, and mark the placement of the bracket holes on your furniture as well. It is essential to ensure that the bracket holes align with the support beams located inside the furniture.
Before drilling any holes, it is important to check for any electrical wires or plumbing behind the wall where you plan to mount your TV. Use a stud finder to locate the support beams in the wall, and avoid drilling into them. If you are unsure about the location of any wires or plumbing, consult a professional.
Once you have confirmed that it is safe to proceed, drill the holes for the bracket into the wall and furniture. Attach the bracket to the wall and furniture using screws and bolts, and ensure that it is securely fastened. Finally, attach the TV to the bracket according to the manufacturer’s instructions.
Prepping your furniture for TV installation
Before you can install the TV mount onto your furniture, you need to ensure that your furniture is prepped and ready for installation. Begin by removing any drawers and ensuring clearance above your furniture. Also, ensure that the surface is clean and that there are no protruding elements on your mounting surface.
Once you have cleared the surface of your furniture, you need to determine the best location for your TV mount. Consider the viewing angle and the height at which you want your TV to be mounted. It is also important to ensure that the mount is securely attached to the furniture to prevent any accidents or damage to your TV.
Before you begin drilling holes or attaching the mount, it is recommended to double-check the compatibility of your TV with the mount. Ensure that the weight and size of your TV are within the limits specified by the manufacturer of the mount. This will prevent any damage to your TV or the mount during installation or use.
Installing the TV mount onto your furniture
Now it is time to install the TV mount onto your furniture. Follow the manufacturer’s instructions on how to install the mount, making sure that it is secure and level.
It is essential to ensure that the bracket holes are drilled straight and that they are sufficiently deep to hold the mounting screws firmly in place.
Before drilling any holes, it is important to locate the studs in the wall behind the furniture. Use a stud finder to locate the studs and mark them with a pencil. This will ensure that the TV mount is securely attached to the wall and can support the weight of the TV.
Once the mount is installed, test it by gently pulling on it to ensure that it is secure. It is also important to periodically check the mount to ensure that it remains secure over time.
Attaching the wall mount bracket to the TV
With the mount attached to your furniture, it is time to attach the wall mount bracket to the back of your TV. This is usually done by aligning the bracket holes with the TV’s mounting holes and securing them using screws, bolts, or nuts.
Ensure the bracket is perfectly aligned, and its screws or bolts are screwed tight with the TV’s mounting holes before hanging your TV.
It is important to note that not all TVs have mounting holes. If your TV does not have mounting holes, you may need to purchase an adapter or a different type of wall mount bracket that is compatible with your TV.
Additionally, it is recommended to have a second person assist you in hanging your TV to ensure it is level and secure on the wall mount bracket.
Mounting the TV onto the furniture
With the wall mount bracket and the TV mount installed, you can now safely hang the TV onto the furniture mount. Place the TV on the mount bracket, and ensure it is levelled properly. Afterward, fix the TV screws to the mount brackets.
It is important to note that the weight of the TV should be evenly distributed on the mount brackets to prevent any damage or accidents. You can use a level tool to ensure that the TV is not tilted or slanted in any way. Additionally, it is recommended to have someone assist you during the mounting process to ensure that the TV is securely attached to the furniture mount.
Before mounting the TV, make sure that the furniture mount is securely attached to the wall or the furniture piece. You can use a stud finder to locate the studs in the wall and attach the mount brackets to them for added stability. It is also important to check the weight capacity of the furniture mount to ensure that it can support the weight of your TV.
Testing and adjusting the position of your mounted TV
Now that your TV is mounted on your furniture, you need to test it and make any necessary adjustments. Ensure that the TV is levelled, and adjust the position of the TV so that it is at a comfortable viewing angle.
If necessary, adjust the angle of the TV by tilting, swivelling, or adjusting the height of the mount until you find the perfect viewing angle.
It is also important to consider the lighting in the room when adjusting the position of your TV. Avoid placing the TV in direct sunlight or in a spot where there is a lot of glare. This can cause eye strain and make it difficult to see the screen clearly. If necessary, adjust the position of the TV or add curtains or blinds to the windows to reduce glare.
Concealing cables and wires for a clean look
To keep the area around the TV looking neat and organized, consider concealing cables and wires. You can use cord covers or cable ties to tidy up your wires, and hide them behind your furniture
Tips for maintaining your mounted TV
Maintaining your mounted TV is essential for longevity. You can clean your TV screen regularly with a microfiber cloth to remove dust dirt and fingerprints. Avoid using water or any cleaning agents directly on the screen, and do not apply pressure when cleaning.
Also, ensure to check the mount’s alignment from time to time, ensure that the mount is securely attached to prevent it from coming loose and causing the TV to fall.
Troubleshooting potential issues with mounting a TV on furniture
Some issues may occur after mounting your TV on furniture. These include the TV’s not powering on or poor picture quality. Check your cables to ensure they are connected correctly and adjust the viewing angle if necessary.
Safety precautions to consider when mounting a TV from furniture
Finally, keep the following safety precautions in mind as you mount your TV from furniture:
- Ensure the furniture is sufficiently sturdy.
- Use a wall mount designed for your TV’s weight and size.
- Ensure the TV’s power cord and cables are securely attached and out of reach of children or pets.
- Do not attempt to mount the TV alone.
With these steps, you should be able to mount your TV from furniture safely and correctly. Enjoy your newly installed TV and get ready for an incredible viewing experience.