A curved tv mounted on a wall

Mounting a curved back TV can be a daunting task, especially if you’re a newbie in the world of home improvement. But worry no more! In this guide, we’ll take you through everything you need to know to mount a curved back TV like a pro. We’ll cover everything from understanding the design of a curved back TV, to choosing the right wall mount, measurements, installation, and tips for maintenance and cleaning. So, let’s dive in!

Understanding the Curved Back TV Design

Before you embark on the journey of mounting your curved back TV, it’s important to understand the design of the TV itself. Curved back TVs are designed with a curved surface on the back which allows them to curve forwards towards the viewer when viewed from an optimal angle. This is to create an immersive viewing experience by making sure that the image is delivered at the same distance to every point of the screen, and therefore producing a more natural and seamless image.

Additionally, the curved back design also helps to reduce glare and reflections on the screen. This is because the curved surface of the TV reflects light away from the viewer, rather than directly back at them. This can be especially beneficial in rooms with lots of natural light or bright overhead lighting. However, it’s important to note that the effectiveness of the curved back design in reducing glare and reflections can vary depending on the specific model and the lighting conditions in your room.

Tools You’ll Need to Mount a Curved Back TV

Here are some tools you’ll need to mount your curved back TV: A power drill, a level, a stud finder, a measuring tape, a pencil, an HDMI cable, and the mounting hardware that comes with the wall mount.

It’s important to note that when mounting a curved back TV, you may also need additional spacers or adapters to ensure a secure and level mount. These can be purchased separately or may come included with the wall mount kit. It’s always a good idea to double check the manufacturer’s instructions and recommendations before beginning the installation process.

Choosing the Right Wall Mount for Your Curved Back TV

The first step in mounting your curved back TV is choosing the right wall mount. Ensure that the mount you choose is compatible with your TV’s size and weight. In addition, consider the type of wall the TV will be mounted on and the viewing angles you want, as some mounts have various degrees of tilt and swivel.

See also  How to Get Wii U Into Home Theater System

Another important factor to consider when choosing a wall mount for your curved back TV is the VESA pattern. This refers to the distance between the mounting holes on the back of your TV. Make sure the wall mount you choose has a VESA pattern that matches your TV’s, or else it won’t be compatible. Additionally, think about the height at which you want to mount your TV, as this can affect the viewing experience. It’s recommended to mount the TV at eye level when seated for optimal comfort.

Measuring and Marking the Wall for the Mounting Bracket

Once you have your wall mount and the necessary tools, it’s time to measure and mark the wall. Use a stud finder to locate the studs in the wall where you intend to mount the TV. Mark the spot where you want the mount to be placed with a pencil. Make sure to use a level to ensure that the mounting bracket is straight.

It’s important to also consider the height at which you want to mount your TV. Take into account the distance between the TV and the seating area, as well as any potential obstructions such as windows or light fixtures. Once you have determined the ideal height, use a tape measure to mark the spot on the wall where the center of the TV will be. This will ensure that your TV is mounted at the perfect height for optimal viewing.

How to Install the Mounting Bracket on the Wall

Now that you have marked the wall, it’s time to install the mounting bracket. Hold the bracket in place and mark the holes in the bracket onto the wall. Drill pilot holes using the power drill and screw the bracket onto the wall with the provided screws. Again, make sure to use a level to ensure that the bracket is straight and level.

It is important to note that the type of wall you are installing the mounting bracket on will affect the installation process. If you are installing on a drywall, you will need to use anchors to ensure that the bracket is securely attached to the wall. If you are installing on a concrete or brick wall, you will need to use a masonry bit to drill the pilot holes and use appropriate screws for the material. Always refer to the manufacturer’s instructions for specific installation guidelines.

See also  How to Mount a Tv on Office Cube

Preparing Your Curved Back TV for Installation

Before you attach the TV to the mount, take a moment to prepare the TV for installation. Take off the stand if your TV came with one. This step will make the TV lighter and less bulky, making it easier to install on the wall mount.

Next, make sure to clean the back of the TV thoroughly. Dust and debris can interfere with the adhesive on the wall mount, causing the TV to fall off. Use a microfiber cloth to wipe down the back of the TV, paying special attention to the edges where the mount will attach.

Finally, double-check that you have all the necessary tools and hardware for installation. This may include a drill, screws, and anchors. Make sure you have the correct size and type of hardware for your specific TV and wall type. It’s better to have everything you need before you start the installation process, rather than having to stop and run to the hardware store mid-project.

Attaching Your Curved Back TV to the Mounting Bracket

With the mounting bracket securely attached to the wall, it’s time to attach the TV to the bracket. Get someone to help you lift the TV onto the bracket and attach it using the provided bolts, nuts, and washers. Make sure you follow the instructions provided in the mount’s manual to ensure you attach the TV correctly.

Before attaching the TV to the bracket, it’s important to check the weight capacity of the mount. Make sure that the weight of your TV does not exceed the maximum weight capacity of the mount. If it does, you will need to purchase a different mount that can support the weight of your TV.

Once you have attached the TV to the bracket, it’s a good idea to test the stability of the mount. Gently push the TV from side to side to make sure it is securely attached to the bracket. If the TV wobbles or feels unstable, you may need to adjust the bolts and nuts to ensure a tighter fit. It’s important to make sure the TV is securely attached to the bracket to prevent any accidents or damage to your TV.

Adjusting and Leveling Your Curved Back TV on the Wall

With your curved back TV attached to the mount, it’s time to adjust and level it. Adjust the tilt and swivel of the TV until you get your desired viewing angle. Use a level to ensure that the TV is level and straight. Once this is done, it’s time to conceal the cables and wires.

When concealing the cables and wires, it’s important to ensure that they are not visible and do not interfere with the aesthetics of the room. You can use cable ties or cable covers to keep the cables organized and hidden. If you have a power outlet behind the TV, you can use a power bridge kit to hide the power cord. This will give your TV a clean and professional look, and prevent any tripping hazards.

See also  How to Mount 50" Emerson Tv

Concealing Cables and Wires After Installation

After the TV has been leveled and adjusted, it’s time to conceal the cables and wires. This step will ensure that your installation looks neat and tidy. There are many ways to do this, including using cable ties, PVC pipes, or wall channels. Choose a method that works for you and your space.

One popular method for concealing cables and wires is to use a cable cover. These covers come in a variety of colors and styles, and can be easily painted to match your wall color. They are also easy to install, and can be cut to fit the length of your cables.

If you prefer a more permanent solution, you can hire a professional to install an in-wall cable management system. This involves cutting holes in your wall and running the cables through them, so they are completely hidden from view. While this option may be more expensive, it provides a clean and seamless look that many homeowners prefer.

Tips for Maintenance and Cleaning of Your Mounted Curved Back TV

Now that your curved back TV is installed and looking great, it’s important to keep it that way. To maintain and clean your TV, use a microfiber cloth to wipe the screen gently. Avoid using harsh chemicals, such as ammonia, to clean the screen as they can damage the surface.

In addition to cleaning the screen, it’s also important to keep the area around the TV clean. Dust and debris can accumulate on the back of the TV and in the vents, which can cause overheating and damage to the internal components. Use a soft-bristled brush or a can of compressed air to gently remove any dust or debris from the back of the TV and the vents. This should be done regularly to ensure proper airflow and prevent any potential damage to your TV.

Troubleshooting Common Issues When Mounting a Curved Back TV

Even if you’re careful, mistakes can happen when mounting your curved back TV. If your TV is not centered, level or you experience any other issue, consult the manual, or seek help from a professional before attempting to fix it yourself. Do not force anything, as this can lead to further damage.

There you have it! Follow these steps, and you’ll have your curved back TV mounted safely and securely in no time. Happy mounting!

It’s important to note that the type of wall you are mounting your curved back TV on can also affect the installation process. For example, if you have a plaster wall, you may need to use special anchors to ensure the TV is securely mounted. On the other hand, if you have a concrete wall, you may need to use a hammer drill to create the necessary holes for the mounting brackets. Always research the best practices for your specific wall type before beginning the installation process.

By admin