Mounting a 65 inch Vizio TV can seem like a daunting task. However, with the right tools, preparation, and a few simple steps, mounting your Vizio TV can be accomplished with ease. In this article, we will guide you through the entire process of mounting your 65 inch Vizio TV, from choosing the right wall mount to adjusting its viewing angle after installation.
Choosing the Right Wall Mount for Your Vizio Tv
Before you start the mounting process, you need to select the appropriate wall mount for your Vizio TV. There are various types of wall mounts, including fixed, tilting, and full-motion mounts. The type of mount you choose will depend on your desired viewing angle and the location of your TV.
For a 65 inch Vizio TV, a full-motion wall mount is the best type of mount to use. The full-motion mount allows you to adjust the viewing angle of your TV in different directions. This type of mount is ideal for a room with multiple viewing angles, such as a living room or a family room.
It is important to note that when selecting a wall mount for your Vizio TV, you should also consider the weight and size of your TV. Make sure to choose a mount that can support the weight and size of your TV to avoid any accidents or damage to your TV. Additionally, it is recommended to hire a professional to install the wall mount to ensure it is properly secured and installed.
Measuring and Marking the Wall for the Wall Mount
Before you can install the wall mount, you need to measure and mark the wall’s location where you want to place the mount. Use a stud finder to locate the wall studs behind the drywall. Mark the center of the wall studs on the wall’s surface where you want to attach the mount.
Using a level, draw a horizontal line where you want to install the mount. Make sure the line is straight to ensure that your TV is level after installation.
It’s important to also consider the height at which you want to install the wall mount. Take into account the height of your furniture and the viewing angle you prefer. A good rule of thumb is to have the center of the TV screen at eye level when seated. Use a tape measure to determine the height and mark it on the wall with a pencil. Double-check the height and placement before drilling any holes for the mount.
Gathering Necessary Tools and Supplies for Mounting
Once you have measured and marked the wall, you need to gather the necessary tools and supplies for mounting. Essential tools include a drill, drill bits, screws, a screwdriver, a stud finder, a level, and a measuring tape.
Also, make sure you have the mounting bracket kit that includes the bracket, mount plate, and screws. Make sure the kit you choose is compatible with your 65 inch Vizio TV.
Before you begin mounting your TV, it’s important to consider the location of the wall and the viewing angle. Make sure the wall you choose is sturdy enough to support the weight of the TV and that it’s at a comfortable viewing height. You may also want to consider using a tilting or swiveling mount to adjust the angle of the TV for optimal viewing.
In addition to the tools and supplies mentioned earlier, you may also need a pencil, a hammer, and a drywall saw. If you’re mounting the TV on a brick or concrete wall, you’ll need a masonry bit and anchors. It’s important to have all the necessary tools and supplies on hand before you begin mounting to avoid any delays or complications.
Securing the Wall Mount Bracket to the Wall
Use your drill and drill bits to pre-drill the holes in the wall where you marked the center of the studs. Attach the wall mount bracket to the wall using screws and a screwdriver into the pre-drilled holes. Make sure the bracket is level and securely attached to the wall.
It is important to ensure that the wall mount bracket is attached to the wall studs for maximum stability and weight capacity. If the bracket is not attached to the studs, it may not be able to support the weight of the TV or other device being mounted, which could result in damage or injury.
Before attaching the bracket to the wall, double-check the measurements and placement to ensure that it is at the desired height and location. It may be helpful to use a level to ensure that the bracket is straight and even before securing it to the wall.
Attaching the TV Mount Plate to Your Vizio Tv
Attach the mount plate to the back of your Vizio TV using the screws and screwdriver provided in the kit. Make sure the plate is securely attached to the TV, and the screws are tight.
Before attaching the mount plate, make sure to locate the VESA pattern on the back of your Vizio TV. This pattern will determine the compatibility of the mount plate with your TV. Refer to the instruction manual to ensure that you are attaching the mount plate to the correct VESA pattern.
It is also important to consider the weight and size of your TV when attaching the mount plate. Make sure that the mount plate can support the weight of your TV and that the size of the plate is appropriate for the size of your TV. If you are unsure, consult the instruction manual or contact the manufacturer for guidance.
Aligning and Attaching the Vizio Tv to the Wall Mount
Carefully align the mount plate on the TV with the wall bracket. Hold the TV and mount plate in place while attaching them securely to the wall mount using screws and a screwdriver. Make sure the TV is level and securely attached to the wall mount.
It is important to ensure that the wall mount is securely attached to the wall before attaching the TV. Use a stud finder to locate the studs in the wall and attach the wall mount to the studs for maximum stability. If you are unable to locate the studs, use wall anchors to secure the wall mount to the drywall.
Before attaching the TV to the wall mount, double-check that all cables are properly connected and that there is enough slack in the cables to allow for any necessary adjustments. Once the TV is attached to the wall mount, test the connections and adjust the TV as needed to ensure optimal viewing angles and picture quality.
Testing Your Mounted Vizio Tv for Stability and Security
Give the mounted TV a gentle shake to test its stability and security. Make sure that the TV is securely mounted, and does not wobble or shake. Repeat this test several times to ensure the TV is secure.
It is also important to check the security of the mounting hardware. Ensure that all screws and bolts are tightened properly and that the mounting bracket is securely attached to the wall. Loose hardware can cause the TV to become unstable and fall, potentially causing damage or injury.
Additionally, consider using a safety strap or anti-tip device for added security. These devices attach to the back of the TV and anchor it to the wall, preventing it from tipping over in the event of an earthquake or accidental bump.
Hiding Cords and Wires for a Clean Look
To achieve a clean look, you need to hide the cords and wires running from your TV. Use cable ties and cord covers to control the cords and wires, making them virtually invisible.
Another option to consider is using a cord-hiding kit, which includes all the necessary materials to conceal cords and wires. These kits often come with adhesive strips, cable clips, and even paintable covers to match your wall color. Additionally, you can also use furniture or decorative items to strategically hide cords and wires, such as placing a potted plant in front of them or using a decorative box to store power strips.
Adjusting Your Vizio Tv’s Viewing Angle after Mounting
If you have chosen a full-motion wall mount, you can adjust the viewing angle of your TV as needed after installation. Use the mount’s adjustment mechanisms to swivel, pivot, or tilt your TV until you achieve the perfect viewing angle.
It is important to note that adjusting the viewing angle of your TV after mounting may require some trial and error. Take your time and make small adjustments until you find the optimal viewing angle. Additionally, be sure to avoid placing your TV in direct sunlight or in a room with excessive glare, as this can negatively impact your viewing experience.
Troubleshooting Common Issues with Mounted Vizio Tvs
If you encounter any issues with your newly mounted Vizio TV, refer to the manufacturer’s manual for troubleshooting tips. Some common issues that you may experience include the TV tilting or being too heavy for the mount to support.
Another common issue that you may encounter with mounted Vizio TVs is poor picture quality. This can be caused by a variety of factors, such as incorrect picture settings or a poor signal from your cable or satellite provider. To troubleshoot this issue, try adjusting the picture settings on your TV or contacting your provider to ensure that you have a strong signal.
Tips for Long-Term Maintenance of Your Mounted Vizio Tv
To ensure that your mounted Vizio TV remains in good condition for years to come, follow these tips:
- Regularly dust and clean the TV screen and the mount to prevent dust buildup
- Do not tilt or swivel your TV too often, as this can damage the mount and cause instability
- Regularly check the mount’s screws to ensure they are tight and secure
Mounting a 65 inch Vizio TV can seem intimidating, but by following these simple steps, you can mount your TV with ease and have a clear, unobstructed view of your favorite television shows or movies.
Another important tip for long-term maintenance of your mounted Vizio TV is to avoid exposing it to extreme temperatures. High temperatures can cause damage to the TV’s internal components, while low temperatures can cause the screen to freeze or crack. Therefore, it is important to keep your TV in a room with a moderate temperature and avoid placing it near sources of heat or cold.
Additionally, it is recommended to use a surge protector to protect your TV from power surges and voltage spikes. Power surges can cause damage to your TV’s circuitry, which can be expensive to repair or replace. By using a surge protector, you can prevent these types of electrical issues and ensure that your TV remains in good condition for years to come.