If you’re looking to spruce up your living space, mounting your 32 inch Roku TV on the wall is one of the best ways to do it. Wall-mounted TVs can give your room a clean and modern look while freeing up valuable space on your entertainment stand. If you’re thinking about mounting your Roku TV, there are several things you need to keep in mind. In this article, we’ll guide you through the process, covering everything from why wall mounting is a good idea to troubleshooting common issues you might face along the way.
The Benefits of Mounting Your TV
There are many reasons to mount your TV on the wall. Firstly, it can save you space. By mounting the TV on the wall, you open up space on the stand or table it was previously on. A mounted TV also allows for greater flexibility in terms of placement, as you can position it at a height and angle that provides the best viewing experience. Wall mounting can also reduce glare and improve the aesthetic of your room. In short, mounting your TV on the wall can help to create a sleek, modern, and minimalist look.
Another benefit of mounting your TV on the wall is that it can improve the safety of your home. If you have children or pets, a TV that is placed on a stand or table can be easily knocked over, causing injury or damage. By mounting the TV securely on the wall, you eliminate this risk. Additionally, a mounted TV can also be more secure in the event of an earthquake or other natural disaster.
Finally, wall mounting your TV can also improve your overall viewing experience. By positioning the TV at the optimal height and angle, you can reduce neck and eye strain, making it more comfortable to watch for extended periods of time. This is especially important if you enjoy watching movies or TV shows for long periods of time. Overall, mounting your TV on the wall can provide a range of benefits that make it a worthwhile investment for any home.
How to Choose the Right Wall Mount for Your TV
Before you start mounting your TV, you’ll need to decide which wall mount to use. There are several types of wall mounts to choose from – flat, tilt, swivel, or full-motion. Each has its own set of pros and cons. Flat mounts are the most basic type of mount and hold your TV securely against the wall with no movement. Tilt mounts allow you to adjust the angle of the screen up or down. Swivel mounts, as the name suggests, allow you to swivel your TV left or right. Full-motion mounts are the most flexible and allow you to adjust the angle, tilt, and swivel your TV as needed. When choosing a mount, consider the size and weight of your TV, as well as your own personal preferences and needs.
Another important factor to consider when choosing a wall mount for your TV is the VESA pattern. This refers to the pattern of screw holes on the back of your TV. Make sure the wall mount you choose is compatible with your TV’s VESA pattern. You can usually find this information in your TV’s manual or by searching online.
It’s also important to consider the placement of your TV and the viewing angle. If you plan on mounting your TV in a high location, such as above a fireplace, a tilt or full-motion mount may be necessary to adjust the angle of the screen for comfortable viewing. If you have a large room with multiple seating areas, a swivel or full-motion mount may be ideal to allow for easy adjustment of the viewing angle from different locations.
Tools and Equipment You’ll Need to Mount Your TV
Before you begin, there are a few tools and materials you’ll need to gather. You’ll need a wall mount, the mounting bracket, a drill, a stud finder, a screwdriver, a level, a tape measure, and possibly an extra set of hands to help you lift the TV onto the mount. Make sure to double-check the instructions that come with both the wall mount and your TV to determine the specific tools and materials that you need.
It’s important to note that the size and weight of your TV will also determine the type of wall mount and bracket you’ll need. For larger TVs, you may need a mount that can support more weight and has a wider bracket. Additionally, if you’re mounting your TV on a brick or concrete wall, you may need specialized tools such as a masonry drill bit and anchors.
Before you start drilling into your wall, it’s also a good idea to locate any electrical wires or plumbing pipes that may be hidden behind the wall. You can use a stud finder to help locate the studs in the wall, but it’s important to be cautious and avoid drilling into any wires or pipes. If you’re unsure about the location of any wires or pipes, it’s best to consult a professional.
How to Measure and Mark the Wall for Your TV Mounting Bracket
Figuring out where to place the mount on the wall is an important step in the process. You’ll need to locate the studs in the wall with a stud finder, as the mount needs to be anchored securely to the wall. Once you’ve found the studs, use a tape measure, level, and pencil to mark where the mount will be installed. It’s essential to make sure that the mount is level and straight to ensure that the TV will sit straight on the wall.
After marking the spot for the mount, it’s important to double-check the measurements before drilling any holes. Use the tape measure and level to ensure that the marks are accurate and that the mount will be installed at the correct height. It’s also a good idea to have someone hold the mount up against the wall to get a better idea of how it will look before drilling any holes.
Before mounting the TV, it’s important to consider the viewing angle. Take into account the height of the couch or seating area and adjust the mount accordingly. You may also want to consider using a tilting or swiveling mount to allow for more flexibility in adjusting the viewing angle.
How to Install Your TV Wall Mounting Bracket
Begin by attaching the mounting bracket to the back of the TV following the manufacturer’s instructions. Make sure that the bracket is securely attached, and that all screws are tightened properly. Then, use a drill to attach the mounting plate to the wall based on the markings you previously made. Once the mount is attached to the wall, use a level to check that it is straight and adjust as needed.
Next, carefully lift the TV and attach it to the mounting bracket on the wall. Make sure that the TV is level and securely attached to the bracket. Double-check that all screws and bolts are tightened properly to avoid any accidents or damage to your TV.
It’s important to consider the location of your TV before mounting it. Make sure that the wall you choose can support the weight of your TV and that there are no obstructions that could interfere with your viewing experience. Additionally, consider the height of the TV and make sure that it is at a comfortable viewing level for your space.
How to Attach the Mounting Plate to the Back of Your Roku TV
Depending on the mount you’ve chosen, you may need to attach extra hardware to the back of your TV to properly mount it. Follow the manufacturer’s instructions carefully to ensure that the mounting plate is correctly attached to the back of the TV.
Before attaching the mounting plate, make sure to clean the back of your TV with a soft cloth to remove any dust or debris. This will ensure that the plate adheres properly and securely to the TV.
It’s also important to consider the weight of your TV and the strength of the wall where you plan to mount it. If you’re unsure about the weight limit of your mount or the strength of your wall, consult a professional installer to avoid any potential damage or accidents.
How to Hang Your Roku TV on the Wall Mount
With the mounting bracket securely attached to both the wall and back of the TV, it is time to hang the TV on the wall mount. This is a two-person job, so be sure to have someone assist you. Lift the TV onto the mount and make sure it clicks into place securely and is level.
Before hanging your Roku TV on the wall mount, it is important to consider the placement of the mount. Make sure it is at a comfortable viewing height and that there is enough space around the TV for proper ventilation. Also, be sure to check the weight limit of the wall mount to ensure it can support your TV.
If you are unsure about how to properly install the wall mount or have any concerns about the process, it is recommended to hire a professional to do the job. This will ensure that your TV is safely and securely mounted on the wall, giving you peace of mind and a great viewing experience.
Adjusting the Position and Leveling Your Roku TV on the Wall
After hanging the TV, you should step back and check the angle and position to ensure it is optimal for viewing. If it is off-center, you may need to adjust the positioning of the bracket and the height of the TV. Use your level to make sure the TV is straight and correctly angled. When you’re satisfied with the results, tighten all screws and bolts to ensure everything is secure.
Tips for Hiding Cords and Wires After Installing a Mounted TV
Once your TV is mounted, it’s essential to organize the cords and wires. Not only does it look better, but it’s also a safer option. You can use cable covers, wire tubing, or even in-wall cable channels to keep cords hidden and neat. Additionally, make sure to use power outlets with surge protection to keep your TV safe from any power surges.
Troubleshooting Common Issues When Mounting a 32 Inch Roku Tv
If you encounter any problems when mounting your TV, such as issues with leveling or securely positioning the mount, refer back to the manufacturer’s instructions. If this doesn’t help, you can seek help from a professional installer who can guide you through the process or even install the mount for you.
With the right tools, equipment, and instructions, mounting your 32 inch Roku TV can be a quick and easy process. Follow these steps and remain patient and meticulous, and you’ll have a beautiful and functional TV mount to enjoy in no time. Enjoy the extra space and the stylish look you’ve created!