A television mounted to a wall with a tilting wall mount

If you are a fan of home entertainment, then you know how essential it is to have the ideal viewing angle for your TV. One way of achieving this is by installing an Onn Tilting Tv Wall Mount. This wall mount offers great flexibility as it allows you to adjust the viewing angle of your TV. This article will provide you with a step-by-step guide on how to install Onn Tilting Tv Wall Mount with the necessary tools, procedures, and precautions to take.

Tools Needed to Install Onn Tilting Tv Wall Mount

Before you begin with the installation process, you will need the following tools:

  • Onn Tilting Tv Wall Mount (including all brackets and screws)
  • Stud Finder
  • Drill and Drill Bits
  • Level
  • Screwdriver
  • Tape Measure

It is important to note that the weight of your TV should also be taken into consideration when installing the Onn Tilting Tv Wall Mount. Make sure to check the weight limit of the wall mount and ensure that your TV does not exceed it. Additionally, it is recommended to have a second person assist with the installation process to ensure safety and accuracy.

Unboxing the Onn Tilting Tv Wall Mount

Once you have all the tools ready, the next step is to unbox the Onn Tilting Tv Wall Mount and check to ensure that you have all the essential components. Understand the wall mount pieces, which include the mount itself, brackets for your TV, bolts, washers, and nuts.

It is important to note that the Onn Tilting Tv Wall Mount comes with a user manual that provides step-by-step instructions on how to install the wall mount. The manual also includes a list of tools required for installation, which may vary depending on the type of wall you have. It is recommended that you read through the manual thoroughly before beginning the installation process to ensure that you have a clear understanding of the steps involved.

See also  How to Put Up a Tv Mount

How to Choose the Right Location for Your TV Wall Mount

When selecting a perfect location to install the Onn Tilting Tv Wall Mount, it’s essential to consider a few things. First, choose a room with minimal distractions and light reflection. Secondly, ensure that the wall where you plan to install the mount can bear the weight of your TV. Third, choose a spot comfortable for everyone in the room to view the TV without straining their necks or eyes.

Another important factor to consider when choosing the right location for your TV wall mount is the distance between the TV and the seating area. The ideal viewing distance is typically 1.5 to 2.5 times the diagonal screen size of your TV. For example, if you have a 50-inch TV, the optimal viewing distance would be between 75 and 125 inches away. This will ensure that you have a comfortable viewing experience and can fully enjoy your favorite shows and movies.

Preparing Your Wall for Onn Tilting Tv Wall Mount Installation

With the perfect location chosen, proceed to prepare your wall for the installation process. First, using the stud finder, locate the studs in your wall and mark their positions using a pencil. Studs offer the necessary structural reinforcement that ensures that your TV stays in place. Secondly, measure and mark the horizontal centerline between the two studs.

After marking the centerline, use a level to ensure that it is straight. This is important as it will ensure that your TV is mounted straight and level. Next, drill pilot holes into the center of each stud, making sure that the holes are slightly smaller than the screws that will be used to mount the bracket. Once the pilot holes are drilled, attach the bracket to the wall using the screws provided. Finally, double-check that the bracket is securely attached to the wall before mounting your TV onto it.

Steps to Install Onn Tilting Tv Wall Mount

With the wall ready, proceed with the installation process by following these steps:

  1. Measure the distance between the mounting holes on the back of your TV.
  2. Place the TV brackets on the TV, ensuring that they align with the mounting holes.
  3. Place the mount on the wall at the centerline and the level and mark the mounting holes with a pencil.
  4. Drill pilot holes using a drill bit, then attach the mount to the wall with screws and washers.
  5. Attach the TV brackets to the mount with bolts.
See also  How to Install Tv Mount on Brick

It is important to note that the weight of your TV should not exceed the weight limit specified by the wall mount manufacturer. Exceeding the weight limit can cause the mount to fail and potentially damage your TV or injure someone. Always double-check the weight limit before purchasing and installing a wall mount.

How to Securely Attach Your TV to the Onn Tilting Tv Wall Mount

After successfully attaching the mount on the wall, proceed to attach your TV to the mount. The best way to do this is by having someone else assist you in lifting the TV while you attach it by placing the screw holes over the tabs on each bracket. Once that is done, you can adjust the tilt angle of the TV to suit your preference.

It is important to ensure that the TV is securely attached to the mount to prevent any accidents or damage. To do this, double-check that all screws are tightened and that the TV is level. You can use a level tool to ensure that the TV is straight and not tilted to one side.

Additionally, it is recommended to periodically check the mount and TV to ensure that they are still securely attached. This is especially important if you have children or pets in the house who may accidentally bump into the TV or mount. Regularly checking the mount and TV can prevent any accidents or damage from occurring.

Adjusting the Tilt of Your TV with the Onn Tilting Tv Wall Mount

With your TV already in place, adjust the tilt angle of the Onn Tilting Wall mount to achieve the perfect viewing angle. Ensure that the tilt isn’t too high or too low, and that the TV is level with the floor. Adjust the tilt angle until you achieve the desired viewing angle.

See also  How to Wall Mount a Tv Without Vesa

It is important to note that the Onn Tilting TV Wall Mount is designed to support TVs of various sizes and weights. Before installing the mount, ensure that your TV falls within the recommended weight range and that the VESA pattern on the back of your TV matches the mount’s specifications.

Additionally, the Onn Tilting TV Wall Mount comes with all the necessary hardware and instructions for easy installation. However, if you are not comfortable with DIY projects, it is recommended that you seek the services of a professional installer to ensure that the mount is securely and safely installed.

Troubleshooting Common Issues During Installation

If you encounter problems during installation, troubleshooting is essential. One of the common issues people run into is the TV not being level and straight. In such cases, go back and adjust the mount to ensure that everything is level and secure. If the brackets are not attaching correctly to your TV, ensure that you have appropriately selected the bracket that suits your TV model.

Another common issue during installation is the cables not being connected correctly. Make sure that all cables are plugged in securely and in the correct ports. If you are still experiencing issues, try using different cables or testing the cables on another device to ensure they are functioning correctly. Additionally, if you are mounting the TV on a wall, ensure that the wall can support the weight of the TV and mount. If you are unsure, consult a professional or refer to the TV and mount’s weight specifications.

Maintenance Tips for Your Onn Tilting Tv Wall Mount

Getting an Onn Tilting Tv Wall Mount installed in your home solves most of your home entertainment issues. However, for the mount to last longer, it’s essential to take good care of it. Regularly clean the mount with a soft cloth and ensure that the cables behind the TV are safely secured to avoid accidents.

With this step-by-step guide, you should be able to install your Onn Tilting Tv Wall Mount successfully and enjoy the perfect viewing angle of your TV. Remember to follow all precautions and take your time to achieve the best results.

Another important maintenance tip for your Onn Tilting Tv Wall Mount is to check the screws and bolts regularly. Over time, they may become loose due to the weight of the TV or other factors. Tighten any loose screws or bolts to ensure that the mount remains stable and secure.

Additionally, it’s important to avoid placing any heavy objects on the mount or using it to support anything other than your TV. This can cause damage to the mount and potentially lead to accidents. Always use the mount as intended and follow the manufacturer’s guidelines for weight limits and usage.

By admin