A wall with a full motion tv wall mount installed

Are you tired of straining your neck to watch TV from across the room? Installing a full motion TV wall mount can not only improve your viewing experience, but also free up valuable floor space. In this step-by-step guide, we will walk you through the process of installing a full motion TV wall mount from start to finish.

The Benefits of Installing a Full Motion Tv Wall Mount

The benefits of installing a full motion TV wall mount are numerous. First and foremost, a wall-mounted TV frees up precious space in your living room or entertainment space. Additionally, being able to adjust the viewing angle and height of your TV can help reduce neck and eye strain, making for a more comfortable viewing experience. Finally, a wall-mounted TV can add a sleek, modern look to your living space.

Another benefit of a full motion TV wall mount is the ability to easily access the back of your TV for maintenance or cable management. With a wall-mounted TV, you can easily tilt or swivel the TV away from the wall, giving you full access to the back of the TV without having to remove it from the wall. This can save you time and hassle when it comes to setting up or troubleshooting your home entertainment system.

Tools and Materials Required for Full Motion Tv Wall Mount Installation

Before you begin your installation, make sure you have the following tools and materials on hand:

  • Stud finder
  • Drill with Phillips bit
  • Level
  • Tape measure
  • Pencil
  • Screwdriver
  • Lag bolts
  • Washers
  • Nuts

Aside from the tools and materials listed above, you may also need a power drill, a hammer, and a socket wrench depending on the type of wall mount you are installing. It is important to read the instructions carefully and gather all necessary tools before beginning the installation process.

Additionally, it is recommended to have a second person assist with the installation, as some wall mounts can be heavy and difficult to maneuver alone. Having a helper can also make it easier to ensure that the mount is level and properly secured to the wall.

See also  How to Tell Mount Pattern Tv

How to Choose the Right Full Motion Tv Wall Mount for Your TV

Choosing the right full motion TV wall mount for your TV can be overwhelming, but it doesn’t have to be. Begin by determining the weight and size of your TV, and ensure that the wall mount you select is rated to hold that weight. Additionally, consider the range of motion you need for your TV. Do you want it to swivel left and right or tilt up and down? Make sure the mount you choose has the necessary range of motion to fit your needs.

Another important factor to consider when choosing a full motion TV wall mount is the VESA pattern of your TV. This refers to the distance between the mounting holes on the back of your TV. Make sure the wall mount you choose is compatible with your TV’s VESA pattern. It’s also important to consider the installation process. Some wall mounts require professional installation, while others can be easily installed by the homeowner. Finally, consider the aesthetics of the wall mount. Choose a mount that complements the style of your room and doesn’t detract from the overall look of your TV.

Different Types of Full Motion Tv Wall Mounts

There are several different types of full motion TV wall mounts available, including low profile, tilting, swivel, and full motion. Low profile wall mounts sit parallel to the wall and offer a sleek, space-saving look. Tilting wall mounts allow you to angle your TV up or down. Swivel wall mounts allow you to move your TV left or right, while full motion wall mounts offer the most range of motion, with the ability to move your TV in any direction.

When choosing a full motion TV wall mount, it’s important to consider the weight and size of your TV, as well as the VESA pattern on the back of your TV. The VESA pattern refers to the distance between the mounting holes on the back of your TV, and different mounts will have different VESA compatibility. It’s also important to ensure that the mount is securely installed into a stud or other sturdy surface, to prevent any accidents or damage to your TV.

Understanding the Anatomy of a Full Motion Tv Wall Mount

Before beginning your installation, it’s important to understand the components of your full motion TV wall mount. A standard full motion TV wall mount typically includes a mounting bracket, a main bracket, and two arms with a tilt mechanism. Understanding the function of each component will make the installation process smoother.

Additionally, it’s important to note that some full motion TV wall mounts may also include a cable management system. This system allows you to neatly organize and conceal the cables that connect your TV to other devices, such as a cable box or gaming console. If your wall mount includes a cable management system, be sure to take advantage of it to create a clean and organized look for your entertainment setup.

See also  How to Tilt Tv Wall Mount Videosecu

How to Measure and Mark the Location for Your Full Motion Tv Wall Mount

Once you have chosen the location for your TV, use a stud finder to locate the studs in the wall. Mark the center of each stud with a pencil to ensure that your mount is securely attached to the wall. Next, use your tape measure and pencil to mark the height where you want your TV to be mounted.

It is important to consider the viewing angle when marking the height for your TV mount. The ideal height for your TV should be at eye level when you are seated. This will ensure that you have a comfortable viewing experience without straining your neck or eyes.

Before drilling any holes, double-check the measurements and make sure that the mount is level. Use a level tool to ensure that the mount is straight and aligned with the studs. Once you have confirmed the measurements and levelness, you can proceed with drilling the holes and attaching the mount to the wall.

How to Install the Main Bracket of a Full Motion Tv Wall Mount

Using a drill and Phillips bit, attach the main bracket to the wall studs with lag bolts, ensuring that it is level. Make sure that the bolts are tight and that the bracket is securely fastened to the wall.

Next, attach the mounting plate to the back of your TV using the provided screws. Make sure that the plate is centered and level on the back of the TV. It is important to use the correct screws and to not over-tighten them, as this can damage your TV.

Once the mounting plate is attached to the TV, carefully lift the TV and align the plate with the main bracket on the wall. Secure the TV to the bracket using the provided locking mechanism. Test the mount by gently pushing and pulling on the TV to ensure that it is securely attached to the wall.

Attaching the Arms and Tilt Mechanism in a Full Motion Tv Wall Mount

Next, attach the arms and tilt mechanism to the main bracket using the provided hardware. Be sure to tighten all screws and bolts securely to ensure that the arms are firmly attached to the main bracket.

Once the arms and tilt mechanism are attached, you can adjust the angle of the TV to your desired viewing position. This is especially useful if you have a large room or multiple seating areas. Simply use the tilt mechanism to adjust the angle up or down, and the arms to move the TV left or right.

See also  How to Motorize a Ceiling Mount Tv

It’s important to note that when attaching the arms and tilt mechanism, you should follow the manufacturer’s instructions carefully. Improper installation can result in damage to your TV or even injury. If you’re unsure about any step of the installation process, it’s best to consult a professional.

Securing Your TV to a Full Motion Tv Wall Mount

Once the main bracket and arms are securely attached to the wall, it’s time to attach your TV. Most full motion TV wall mounts include brackets or mounting plates that attach to the back of your TV. Attach these brackets to your TV, then attach the brackets to the arms of the wall mount.

It’s important to make sure that your TV is properly secured to the wall mount to prevent any accidents or damage. Double check that all screws and bolts are tightened and that the TV is level. You may also want to consider using safety straps or locks for added security.

Before mounting your TV, it’s also important to consider the weight and size of your TV and ensure that the wall mount is rated to support it. If you’re unsure, consult the manufacturer’s instructions or seek the advice of a professional installer.

Testing Your Full Motion Tv Wall Mount for Stability and Range of Motion

Before you begin using your newly installed full motion TV wall mount, it’s important to test it for stability and range of motion. Adjust the angle and height of your TV to ensure that it moves smoothly and stays in place. Test the stability by gently pushing and pulling on your TV to ensure it is securely attached to the wall mount.

Another important factor to consider when testing your full motion TV wall mount is the weight capacity. Make sure that your TV is within the weight limit specified by the manufacturer of the wall mount. Overloading the wall mount can cause it to become unstable and potentially damage your TV or the wall.

It’s also a good idea to test the range of motion of your wall mount. Move your TV to different angles and positions to ensure that it can be adjusted to your desired viewing position. Check for any obstructions or limitations in the movement of the wall mount that may prevent you from achieving your desired viewing angle.

Tips and Tricks for Troubleshooting Common Issues with a Full Motion Tv Wall Mount Installation

If you encounter any issues during your installation, there are a few common troubleshooting tips to keep in mind. Double-check that your wall mount is rated to hold the weight of your TV, and make sure that all bolts and screws are tightened securely. If your TV is not level, adjust the tilt and swivel mechanisms until it is properly aligned.

Maintaining Your Full Motion Tv Wall Mount for Longevity and Performance

Regular maintenance of your full motion TV wall mount can help ensure its long-term performance. Keep the hardware clean and free of debris, and lubricate any moving parts as needed. If you need to make adjustments to the mount, be sure to follow the manufacturer’s instructions carefully to avoid damaging the wall or the mount itself.

Congratulations! You have successfully installed a full motion TV wall mount that will improve your viewing experience and free up valuable space in your home. Enjoy your newly-mounted TV!

By admin