Television is an integral part of our lives, and we all want to have the best viewing experience. Installing a corner TV mount can enhance your viewing experience by providing an optimal viewing angle and saving space. In this article, we will guide you through the necessary steps to properly install a corner TV mount. It may seem complicated at first, but with patience and proper tools, you can install it in no time.
Tools Required for Installing a Corner Tv Mount
The first step to installing a corner TV mount is to gather all the tools required for the job. The tools will depend on the type of TV mount you have purchased, but some tools you may need include:
- Stud Finder
- Drill with drill bit and driver bits
- Tape measure
- Pencil or marker
Before you begin the installation process, it is important to ensure that you have chosen the right corner for your TV mount. You should consider factors such as the viewing angle, the distance from the seating area, and the location of power outlets and cable connections.
Additionally, it is recommended that you have a helper to assist you during the installation process. This will make it easier to hold the mount in place while you secure it to the wall, and it will also reduce the risk of injury or damage to your TV.
Measuring the Wall for Proper Tv Placement
The next step is to measure the wall where you want to mount the TV. Proper placement is important to ensure the best viewing experience. You need to measure the distances between the corners of your wall and the height of your eyes when seated on the couch. A good rule of thumb is to mount the TV 42 inches above the floor for optimal viewing angle.
Another important factor to consider when measuring the wall for proper TV placement is the distance between the TV and the seating area. The ideal viewing distance is typically 1.5 to 2.5 times the diagonal screen size of the TV. For example, if you have a 50-inch TV, the optimal viewing distance would be between 75 and 125 inches.
It’s also important to consider the lighting in the room when deciding on the placement of your TV. Avoid placing the TV in direct sunlight or in a spot where there is a lot of glare. You may need to adjust the placement of your TV or invest in curtains or blinds to control the amount of light in the room.
Finding the Best Location for Your Corner Tv Mount
After measuring the wall for placement, finding the best location is crucial. You want to make sure that the TV mount is securely attached to a stud in the wall to ensure stability. Use a stud finder to locate the studs in the wall and mark them with your pencil or marker. Keep in mind that the location should also provide the optimal viewing angle and be accessible to power outlets and cable connections.
Another important factor to consider when finding the best location for your corner TV mount is the height at which you will be mounting it. The ideal height for your TV will depend on the size of the screen and the distance between the TV and the seating area. As a general rule, the center of the TV screen should be at eye level when you are seated. This will help prevent neck strain and ensure a comfortable viewing experience.
It’s also important to consider the overall layout of the room when choosing the location for your corner TV mount. You want to make sure that the TV is not obstructing any doorways or windows and that it is not placed in a high-traffic area where people may bump into it. Additionally, you may want to consider the overall aesthetic of the room and choose a location that complements the existing decor.
Preparing the Wall for Installation
Before you begin drilling holes, you need to prepare the wall for the installation of the corner TV mount. Remove any furniture or obstacles around the installation area and clean the wall surface for the mounting bracket. You can use a dry cloth or a mild cleaner solution. Once the wall is clean, you are ready to proceed to the next step.
It is important to note that you should also locate the studs in the wall before drilling any holes. This will ensure that the TV mount is securely attached to the wall and can support the weight of your TV. You can use a stud finder tool or tap the wall to listen for a solid sound, indicating the presence of a stud. Mark the location of the studs with a pencil before drilling any holes.
Tips for Choosing the Right Corner Tv Mount
One of the key factors for a successful installation is choosing the right corner TV mount. You need to consider the weight and size of your TV, the type of corner mount, the angle of tilt or swivel, and any additional features it may have. It is important to choose a mount that is compatible with your TV model and can support its weight and size. Always read the manufacturer’s instructions and recommendations before purchasing a corner TV mount to ensure compatibility and safety.
Another important factor to consider when choosing a corner TV mount is the viewing angle. You want to make sure that the mount allows for comfortable viewing from different angles in the room. Some mounts offer adjustable tilt and swivel features, which can help you achieve the perfect viewing angle. Additionally, you may want to consider a mount that allows for easy cable management, to keep your cords organized and out of sight.
When installing a corner TV mount, it is also important to ensure that it is securely attached to the wall. Make sure to use the appropriate hardware and follow the manufacturer’s instructions carefully. If you are unsure about the installation process, it may be best to hire a professional to ensure that the mount is installed safely and securely.
Assembling the Mounting Bracket and Securing it to the Wall
The next step in installing a corner TV mount is assembling the mounting bracket and securing it to the wall. Follow the manufacturer’s instructions to assemble the bracket. Once assembled, attach it to the wall using the drill and screws provided with your mount. Make sure to use the marked stud locations to ensure stability and use a level to ensure that the bracket is straight.
It is important to note that the weight of your TV should be taken into consideration when selecting the appropriate screws and anchors for your mount. If your TV is particularly heavy, it may be necessary to use additional support, such as a toggle bolt or a wall plate. Consult the manufacturer’s instructions or a professional installer for guidance on the appropriate hardware to use.
Additionally, before mounting your TV, it is a good idea to test the bracket’s stability by gently pulling on it. If it feels loose or wobbly, double-check that the screws are securely fastened and that the bracket is level. Taking the time to properly install your corner TV mount will ensure that your TV is safely and securely mounted, providing you with a comfortable viewing experience for years to come.
Attaching the Mounting Plate to the Tv
After securing the bracket to the wall, you can attach the mounting plate to the TV. The mounting plate attaches to the back of the TV, allowing it to hang on the bracket. Use the screws provided with your mount and the instructions provided by the manufacturer to attach the plate to your TV. Make sure that the plate is securely attached to the TV to ensure stability.
It is important to note that the size and weight of your TV will determine the type of mounting plate you need. Be sure to check the specifications of your TV and mount to ensure compatibility. Additionally, some mounting plates come with adjustable arms that allow you to position the TV at different angles. Take the time to adjust the arms to your desired viewing angle before tightening the screws.
Before hanging your TV on the bracket, double-check that all screws and bolts are tightened securely. It is also a good idea to have a second person assist you in lifting and hanging the TV on the bracket to avoid any accidents or damage to the TV. Once the TV is securely in place, test it by gently pushing and pulling on the corners to ensure it is stable and level.
Hanging the Tv on the Corner Mount
Now that the bracket and mounting plate are properly assembled and attached, you can hang the TV on the corner mount. This step requires two people to lift and hang the TV on the bracket. Take your time and make sure that the TV is securely in place on the mount.
Making Adjustments and Finalizing Installation
After hanging the TV, it is time to make adjustments for the best viewing angle. Most corner mounts allow for tilt or swivel adjustments. Use the instructions provided by the manufacturer to make these adjustments. Once you are satisfied with the viewing angle, make any cable connections, plug in the power cord, and turn on your TV. If everything is working correctly, congratulations, you have successfully installed your corner TV mount!
Testing Your Corner Tv Mount for Safety and Stability
Before you start binge-watching your favorite shows, you should test your installation to ensure safety and stability. Try moving the TV side to side and up and down to make sure that it is securely attached to the mount. Check all the cable connections and make sure the TV is level. If everything is in order, you can sit back and relax.
Common Mistakes to Avoid When Installing a Corner Tv Mount
There are some common mistakes that people make when installing a corner TV mount. One of the most common mistakes is not attaching the mount to a stud, which can lead to instability and even damage to your wall. Another common mistake is using the wrong size screws or not tightening them enough, which can cause the mount to fail. Always follow the manufacturer’s instructions and recommendations and avoid these common mistakes.
Troubleshooting Tips for Common Issues with Corner Tv Mounts
If you experience any issues after installing your corner TV mount, there are some troubleshooting tips you can try. Check all the cable connections and make sure that the TV is level. If you are experiencing stability issues, try tightening the screws or repositioning the mount. If the TV is not fitting properly on the mount, make sure that you have chosen the right mount for your TV size and weight.
How to Hide Cords and Wires with Your New Corner Tv Mount
One final step to take after installing a corner TV mount is to hide the cords and wires. This can be done using cord covers or wiremold. Cord covers are easy to install and come in many different styles and colors to match your wall decor. Wiremold is a more permanent solution that allows you to run cords and wires behind the wall for a clean and streamlined look.
Installing a corner TV mount can be a daunting task, but with the proper tools and patience, you can do it yourself. Follow these steps and recommendations to ensure a successful installation and enhanced viewing experience. Always read and follow the manufacturer’s instructions and recommendations to maintain safety and stability. Enjoy your newly installed corner TV mount!