Mounting your TV on the wall can be a great way to free up space in your living room and create a more streamlined look. Installing Armstrong Tv Wall Mount is a simple and easy process, provided you have the right tools and follow a few basic steps. In this article, we will guide you through the steps required to install Armstrong Tv Wall Mount safely and securely.
Step-by-step process for installing Armstrong Tv Wall Mount
The following are the steps involved in installing Armstrong Tv Wall Mount:
Before starting the installation process, ensure that you have all the necessary tools and equipment, including a drill, screwdriver, level, and measuring tape.
Step 1: Locate the wall studs using a stud finder and mark their positions with a pencil.
Step 2: Hold the mounting bracket against the wall and align it with the marked studs. Use a level to ensure that it is straight and mark the screw holes with a pencil.
Step 3: Drill pilot holes into the marked screw holes using a drill bit that is slightly smaller than the screws provided.
Step 4: Attach the mounting bracket to the wall using the screws provided and a screwdriver.
Step 5: Attach the mounting plate to the back of your TV using the screws provided and a screwdriver.
Step 6: Hook the mounting plate onto the mounting bracket on the wall and secure it in place with the locking mechanism.
Step 7: Adjust the TV to the desired viewing angle and tighten any loose screws.
By following these steps, you can easily install your Armstrong Tv Wall Mount and enjoy your favorite shows and movies with ease.
Tools required for installing Armstrong Tv Wall Mount
Before we begin, you will need a few tools to complete the installation. Here is a list of the tools you will need:
In addition to the tools listed above, you may also need a stud finder to locate the studs in your wall. This will ensure that your TV is securely mounted and will not fall off the wall. It is also recommended to have a level to ensure that your TV is mounted straight. If you do not have these tools, they can be purchased at your local hardware store or online.
Preparing the wall for Armstrong Tv Wall Mount installation
Before you start drilling holes in your wall, you need to make sure that the wall is strong enough to support your TV. You also need to prepare the area where you will be installing the mounting bracket.
One way to check if your wall is strong enough is to use a stud finder to locate the studs in the wall. These are the vertical wooden beams that provide support for the wall. Once you have located the studs, you can mark the area where you will be drilling the holes for the mounting bracket.
It is also important to clear the area around the wall where you will be working. Remove any furniture or objects that may obstruct your movement or cause damage to your TV. You may also want to cover the floor with a protective sheet to prevent any debris or dust from getting on your carpet or flooring.
Marking the correct spot for Armstrong Tv Wall Mount installation
Once you have prepared the wall, you need to mark the correct spot where the wall mount will be installed. Marking the correct installation spot is crucial for ensuring that your TV is straight and level once it is mounted.
Before marking the spot, it is important to consider the viewing angle and height of the TV. The ideal height for a TV mount is at eye level when seated, which can vary depending on the height of your furniture and the distance from the TV to the seating area. Additionally, the viewing angle should be taken into account to avoid glare or discomfort while watching TV.
When marking the spot, use a level to ensure that the mount will be straight. It is also recommended to use a stud finder to locate the studs in the wall, as mounting the TV on a stud will provide the necessary support for the weight of the TV. If there are no studs in the desired location, it is important to use appropriate anchors to ensure the mount is securely attached to the wall.
Installing the mounting bracket on the wall
Once you have marked the spot for the wall mount, it’s time to install the mounting bracket. Here is how to do it:
Before you begin, make sure you have all the necessary tools and equipment. You will need a drill, screws, a level, and a measuring tape. Once you have everything ready, hold the mounting bracket against the wall and use the level to ensure it is straight. Mark the spots where you will drill the screws.
Next, drill the screws into the wall at the marked spots. Make sure the screws are tight and secure. Once the bracket is attached to the wall, double-check that it is level. You can adjust it slightly if needed by loosening the screws and repositioning the bracket.
After the bracket is securely attached to the wall, you can proceed with attaching the mount to your device. Follow the manufacturer’s instructions carefully to ensure a safe and secure installation. Once your device is mounted, test it to make sure it is stable and secure before using it.
Attaching the TV mounting plate to the TV
After the mounting bracket is installed, it’s time to attach the mounting plate to the TV. Here are the steps to follow:
Before attaching the mounting plate, make sure that the TV is turned off and unplugged. This will prevent any electrical shock or damage to the TV. Once the TV is unplugged, locate the mounting holes on the back of the TV. These holes are usually covered by plastic caps that need to be removed before attaching the mounting plate.
Once the mounting holes are exposed, align the mounting plate with the holes and use the screws provided to attach the plate to the TV. Make sure that the screws are tightened securely, but be careful not to over-tighten them as this can damage the TV. Once the mounting plate is attached, you can then attach the TV to the mounting bracket on the wall.
Securing the Armstrong Tv Wall Mount to the mounting bracket on the wall
Now that the mounting bracket and mounting plate are installed, it’s time to secure the Armstrong Tv Wall Mount to the mounting bracket on the wall. Here is how to do it:
Before securing the Armstrong Tv Wall Mount to the mounting bracket on the wall, make sure that the mounting plate is securely attached to the back of your TV. Once you have confirmed this, carefully lift the TV and align the mounting bracket on the wall with the mounting plate on the back of the TV. Once aligned, gently lower the TV onto the mounting bracket, making sure that it is securely in place. Finally, use the provided screws to attach the Armstrong Tv Wall Mount to the mounting bracket on the wall, ensuring that it is tightly secured.
Cable management tips for a clean and organized look
After the Armstrong Tv Wall Mount is secured, you must organize the cables to give a clean and clutter-free look. Here are some tips:
Firstly, consider using cable ties or Velcro straps to group cables together. This will prevent them from tangling and make it easier to identify which cable belongs to which device. Additionally, you can use cable clips or adhesive cable holders to keep cables neatly attached to the wall or furniture.
Another useful tip is to label your cables. This can be done using small tags or colored tape. By labeling your cables, you can easily identify which cable belongs to which device, making it easier to troubleshoot any issues that may arise. It also helps when you need to unplug a device and plug it back in later.
Adjusting and leveling the TV on the Armstrong Wall Mount
Now that the Armstrong Tv Wall Mount is installed, it’s time to adjust and level the TV. Here are the steps to follow:
Step 1: Use a level to ensure that the wall mount is straight. If it’s not, adjust it until it is level.
Step 2: Attach the brackets to the back of the TV. Make sure they are securely fastened.
Step 3: Lift the TV onto the wall mount. Have someone assist you to ensure that the TV is lifted and placed onto the mount safely.
Step 4: Adjust the tilt of the TV. Most wall mounts have a tilting mechanism that allows you to adjust the angle of the TV. Use this feature to ensure that the TV is at the desired angle for optimal viewing.
Step 5: Check the level of the TV. Use a level to ensure that the TV is straight. If it’s not, adjust the tilt until it is level.
Step 6: Enjoy your newly mounted TV! Now that it’s properly adjusted and leveled, you can sit back and enjoy your favorite shows and movies with ease.
Troubleshooting common issues during installation
While installing Armstrong Tv Wall Mount, you may run into some common problems. Here are some possible issues and their solutions:
Issue 1: The wall mount is not level.
Solution: Use a level to ensure that the wall mount is straight before drilling any holes. If the mount is already installed and not level, loosen the screws and adjust the mount until it is level.
Issue 2: The screws provided are too short or too long.
Solution: Check the instructions to see what size screws are required for your specific TV and wall type. If the screws provided are not the correct size, purchase the appropriate screws from a hardware store. Be sure to use screws that are the correct length and diameter for your TV and wall type.
Safety precautions to follow when installing Armstrong Tv Wall Mount
While installing Armstrong Tv Wall Mount, it’s essential to take the necessary safety precautions to avoid any accidents. Here are some tips:
Frequently asked questions about installing Armstrong Tv Wall Mount
Here are some of the most commonly asked questions about installing Armstrong Tv Wall Mount:
Comparing different types of wall mounts available in the market.
When selecting the right wall mount for your TV, you need to be aware of the different types of wall mounts available in the market. Let’s take a look at the most popular types of wall mounts available:
Tips to choose the right wall mount for your TV size and room layout.
Selecting the right wall mount for your TV depends on several factors such as TV size, room layout, and viewing distance. Here are some tips:
How to care and maintain your newly installed Armstrong Tv Wall Mount?
Congratulations on successfully installing Armstrong Tv Wall Mount. To make sure that it lasts you for years to come, it’s essential to take proper care of it. Here are some tips:
By following the above steps, you can install Armstrong Tv Wall Mount safely and quickly. If you encounter any issues, make sure to refer to the installation guide or contact a professional for help. Enjoy your newly mounted TV and the extra space it provides in your living room!