A wall with an onn tv mount installed

Installing a TV mount can be a daunting task, but with the right tools and steps, it can be a breeze. In this guide, we’ll be showing you how to install an Onn TV mount step by step. Before you start the installation process, ensure you have all the required tools and equipment, including a drill, drill bits, stud finder, level, measuring tape, and a screwdriver.

Gathering the Required Tools and Equipment

The first step in installing an Onn TV mount is to gather all the necessary equipment and tools. Ensure that you have everything you need before you start the installation process to avoid any interruptions. Some of the tools you may need include a measuring tape, a drill, drill bits, a screwdriver, a stud finder, and a level.

It is also important to make sure that you have the appropriate hardware for your specific TV mount and wall type. This may include bolts, screws, and anchors. Refer to the instructions provided with your TV mount to ensure that you have the correct hardware for your installation. If you are unsure, consult with a professional or contact the manufacturer for assistance.

Finding the Right Wall for Your TV Mount

When choosing a wall for your TV mount, it’s crucial to choose a sturdy and strong wall that can carry the weight of your TV. Stud walls are ideal for this purpose, and you can use a stud finder to locate and mark the studs. Ensure that the wall is also conveniently located and easily accessible.

Another important factor to consider when choosing a wall for your TV mount is the viewing angle. You want to make sure that the TV is mounted at a comfortable height and angle for optimal viewing. Take into account the distance between the TV and seating area, as well as any potential glare or reflections from windows or lights. It may be helpful to test out different mounting heights and angles before making a final decision.

Choosing the Right Height for Your Wall Mount

The height at which you install your TV mount is also crucial. Typically, the ideal height for your TV should be at eye level when seated. Measure from the floor to ensure a comfortable viewing experience for all members of your household, and mark that height on the wall.

See also  Sony Ht Ddw660 Home Theater System How to Adjustment

However, there are some exceptions to this rule. If you plan on mounting your TV in a room where you will be standing most of the time, such as a home gym or kitchen, you may want to consider mounting it higher than eye level to avoid neck strain. On the other hand, if you plan on watching TV while lying down, such as in a bedroom, you may want to mount it lower than eye level for a more comfortable viewing angle.

It’s also important to consider the size of your TV when choosing the height for your wall mount. A larger TV may need to be mounted higher to avoid taking up too much space in the room, while a smaller TV can be mounted lower without obstructing the view. Ultimately, the right height for your wall mount will depend on your personal preferences and the layout of your room.

Measuring and Marking the Installation Area

Next, use a measuring tape to measure the width and height of your TV. Use these measurements to mark the installation area on the wall using a pencil. Ensure that the markings are level and accurate before proceeding to the next step.

It is important to also consider the viewing distance when marking the installation area. The ideal viewing distance for a TV is typically 1.5 to 2 times the diagonal screen size. For example, if your TV has a 50-inch diagonal screen size, the ideal viewing distance would be between 75 to 100 inches. Make sure to take this into account when marking the installation area to ensure optimal viewing experience.

Drilling Holes into the Wall for Your TV Mount

Now that you have your measurements and marks in place, it’s time to drill holes into the wall to install the mount. Start by drilling the pilot holes into the studs, using the designated drill bit to ensure the holes are the ideal size. Ensure that the holes are level and parallel before moving on to the next step.

It’s important to note that if you’re drilling into a concrete or brick wall, you’ll need to use a masonry bit instead of a regular drill bit. Additionally, make sure to wear protective eyewear and a dust mask to avoid inhaling any debris. Once the pilot holes are drilled, you can then attach the mount to the wall using the appropriate screws and hardware. Double check that the mount is securely attached before mounting your TV.

Attaching the TV Mount Bracket to the Wall

After drilling the holes, it’s time to attach the TV mount bracket to the wall using the screws. Insert the screws into the pilot holes and tighten them securely using a screwdriver. Ensure that the bracket is level and secure before proceeding to the next step.

See also  40" Westinghouse Tv How to Wall Mount

It is important to note that the type of screws used to attach the TV mount bracket to the wall will depend on the type of wall material. For example, if the wall is made of drywall, it is recommended to use toggle bolts instead of regular screws to ensure a secure attachment. On the other hand, if the wall is made of concrete, masonry screws are the best option.

Before attaching the TV mount bracket to the wall, it is also important to consider the height and viewing angle. The ideal height for a TV mount bracket is at eye level when seated, and the viewing angle should be adjusted to avoid glare and ensure comfortable viewing. It is recommended to test the height and angle before permanently attaching the bracket to the wall.

Connecting the TV Mount Arms to Your TV

Now it’s time to connect the TV mount arms to your TV. Use the designated screws and ensure that the arms are securely attached to your TV. It’s essential to read the manual to ensure that you’re using the right screws and connecting the arms appropriately.

Before attaching the TV mount arms to your TV, make sure that the TV is turned off and unplugged. This will prevent any electrical damage or injury during the installation process. Additionally, it’s recommended to have a second person assist you in holding the TV while you attach the mount arms to ensure that it’s done safely and securely.

Once the TV mount arms are attached, you can adjust the angle and position of the TV to your desired viewing preference. It’s important to test the stability of the mount and ensure that the TV is level before leaving it unattended. Regularly check the mount and screws to ensure that they remain secure over time.

Lifting and Hanging Your TV onto the Wall Mount Bracket

Once you’ve connected the mount arms to your TV, it’s time to lift and hang your TV onto the wall mount bracket. It’s advisable to ask someone to assist you with this step to avoid damaging the TV or wall mount bracket during installation.

Before lifting and hanging your TV onto the wall mount bracket, make sure that the bracket is securely attached to the wall and that it can support the weight of your TV. You can use a stud finder to locate the studs in the wall and mount the bracket onto them for added stability. Additionally, ensure that all cables and cords are properly connected and organized before lifting the TV onto the bracket to avoid any damage or disconnection.

Adjusting Your TV on the Wall Mount Bracket

Once your TV is safely hung on the wall mount bracket, you’ll need to adjust it to the appropriate viewing angle. Use a level to ensure that your TV is straight and adjust the mount arms accordingly. It’s essential to take your time and ensure that your TV is at the correct angle for the best viewing experience.

See also  How to Choose a Tv Wall Mount Lifehacker

Another important factor to consider when adjusting your TV on the wall mount bracket is the distance between the TV and the seating area. The ideal distance for comfortable viewing depends on the size of your TV. For instance, if you have a 55-inch TV, the recommended distance between the TV and the seating area is about 7 feet. Adjust the angle of your TV to ensure that it’s at the right distance for optimal viewing.

Additionally, you may want to consider the lighting in the room when adjusting your TV on the wall mount bracket. If there’s too much glare on the screen, it can be distracting and make it difficult to see the picture clearly. You can minimize glare by adjusting the angle of your TV or by using curtains or blinds to block out excess light. This will help to ensure that you have the best possible viewing experience.

Securing and Tightening All Connections

After adjusting your TV to the correct angle, it’s time to secure and tighten all connections, including the mount bracket, mount arms, and TV. Ensure that all screws are securely tightened to avoid any potential accidents or damage.

It is also important to check the cables and wires connected to your TV. Make sure they are properly plugged in and secured to avoid any signal loss or interruption. Loose cables can cause poor picture quality or even damage your TV.

If you are mounting your TV on a wall, it is recommended to use a stud finder to locate the studs in the wall. This will ensure that your TV is mounted securely and can support its weight. If you are unsure about the installation process, it is best to seek professional help to avoid any accidents or damage to your TV or wall.

Concealing Wires and Cables

After installing your TV mount, you may need to conceal the wires and cables. This can be done by routing them through a wall or using cable covers. Ensure that the cables and wires are securely routed to avoid any accidents or damage.

Troubleshooting Installation Issues

If you experience any issues during the installation process, do not hesitate to consult the manual or reach out to the manufacturer’s customer service for assistance. It’s essential to take your time and ensure that your Onn TV mount is installed correctly for the best viewing experience.

Tips for Maintaining Your Onn TV Mount

To ensure that your Onn TV mount lasts for a long time, it’s crucial to maintain it properly. This includes ensuring that all screws are securely tightened, periodically checking the mount for any wear or damage, and cleaning the mount regularly.

Conclusion:

Installing an Onn TV mount requires patience and attention to detail. Follow these steps, and you’ll have your TV mounted in no time. Ensure that you have all the required tools and equipment, measure and mark the installation area accurately, and securely tighten all screws and connections. Lastly, always read the manual and reach out to the manufacturer’s customer service if you experience any issues during the installation process.

By admin