A corner TV wall mount is a great way to help you optimize your space by taking advantage of unused corner walls. Not only is it a great space saver, it also provides a more comfortable and enjoyable viewing experience. In this article, we’ll take you through the steps on how to install a corner TV wall mount with ease.
The Benefits of a Corner TV Wall Mount
A corner TV wall mount has a number of benefits over a traditional flat wall mount. By choosing a corner mount, you will be able to:
- Maximize your living space: A corner mount allows you to use space that is otherwise unused, making it perfect for smaller living spaces.
- Get a better viewing experience: You will have more flexibility to adjust your TV’s placement to get the best viewing angles.
- Enjoy a clean look: A corner mount can help you reduce clutter by getting your TV off the floor, freeing up space.
Another benefit of a corner TV wall mount is that it can help to reduce glare. By positioning your TV in a corner, you can avoid direct sunlight or other light sources that may cause glare on your screen. This can make it easier to watch your favorite shows or movies without any distractions.
Additionally, a corner TV wall mount can be a great option for families with children or pets. By mounting your TV in a corner, you can help to keep it out of reach of curious little hands or paws. This can help to prevent accidents and damage to your TV, giving you peace of mind.
Tools Needed for Installing a Corner TV Wall Mount
Before starting your installation, you will want to make sure you have all the necessary tools on hand. These include:
- Drill
- Level
- Stud finder
- Tape measure
- Screwdriver or socket wrench
- Pencil
- Socket or crescent wrench
- Drywall anchors (if needed)
It is also important to have a helper to assist you during the installation process. Mounting a TV on a corner wall can be a challenging task, and having an extra set of hands can make the process much easier and safer. Additionally, it is recommended to wear safety goggles and gloves to protect yourself from any potential hazards while drilling or handling the mount.
Measuring and Marking the Wall for Installation
Before drilling any holes, you need to decide where you want to place your TV on the wall. Start by measuring the corner wall and marking the center point.
Using your pencil, draw a line down the center of the wall where you plan to install the mount. You may also want to mark the height and width where you want the TV to be mounted.
It is important to consider the viewing angle when deciding on the height of the TV mount. A good rule of thumb is to mount the TV at eye level when seated. This will ensure a comfortable viewing experience and prevent neck strain.
Additionally, if you plan on running cables behind the wall, make sure to mark the location of any electrical outlets or cable jacks. This will help you avoid drilling into any wires or pipes and ensure a safe installation.
Finding the Studs in Your Wall
Locating the studs in your wall is important for secure installation. A good stud finder will help you identify where they are. Run the stud finder over the wall and mark where it beeps to indicate where the stud is located.
It’s important to note that not all stud finders are created equal. Some may have different sensitivity levels or be better suited for certain wall types. It’s a good idea to do some research and read reviews before purchasing a stud finder to ensure you get one that will work well for your needs. Additionally, if you’re having trouble finding studs, you can try using a magnet to locate the nails or screws that are holding the drywall to the studs.
Using Anchors for Drywall Installations
If you have drywall that isn’t supported by studs, you will need to use anchors to ensure that your TV mount is securely installed. Follow the instructions included with the anchors to install them before attaching the mount.
It is important to choose the right type of anchor for your drywall. Plastic anchors are suitable for lightweight mounts, while metal anchors are better for heavier mounts. Make sure to choose an anchor that can support the weight of your TV and mount. Additionally, it is recommended to use at least two anchors for added stability.
Preparing the TV for Installation
Before beginning installation, you’ll want to remove any old brackets or TV stands from the back of your TV. This will make it easier to align the mounting brackets to the TV.
Next, you should clean the back of your TV with a soft cloth to remove any dust or debris. This will ensure that the mounting brackets adhere properly to the TV and prevent any damage to the TV’s surface.
If you are mounting your TV on a wall, make sure to locate the studs in the wall and mark them with a pencil. This will help you to properly align the mounting brackets and ensure that your TV is securely attached to the wall.
Attaching the Mounting Bracket to the TV
Secure the mounting bracket onto the back of your TV using the screws provided. Make sure they are tightened securely so that the brackets will stay in place.
It is important to note that the size and weight of your TV will determine the type of mounting bracket you need. Be sure to check the specifications of your TV and the mounting bracket to ensure they are compatible. If you are unsure, consult with a professional or refer to the manufacturer’s guidelines.
Attaching the Mounting Plate to the Wall
With your TV ready to go, it’s time to install the mounting plate to the wall. Align the mounting plate with the center line you drew earlier, and mark the location of the screw holes using your pencil.
Using a drill, make pilot holes for the screws, then attach the mounting plate to the wall. Make sure it is level and securely attached before moving on.
It is important to consider the type of wall you are attaching the mounting plate to. If it is a drywall, you will need to use anchors to ensure the screws hold properly. If it is a concrete or brick wall, you will need to use a masonry bit to drill the pilot holes.
Before attaching the mounting plate, double check that the location is suitable for viewing. Consider the height and angle of the TV, as well as any potential glare or reflections from nearby windows or lights.
Securing the TV to the Mounting Bracket
With the mounting bracket and the wall plate securely in place, it’s time to attach your TV. Depending on the design of your mount, you may need someone to help you lift the TV and guide it into place on the wall bracket.
Gently adjust the mount until the TV is level and secure.
It is important to ensure that the TV is properly secured to the mounting bracket to prevent any accidents or damage. Double check that all screws and bolts are tightened and that the TV is firmly attached to the bracket. It is also recommended to periodically check the security of the mount and TV over time to ensure that it remains stable and safe.
Concealing Wires and Cables for a Clean Look
Now that your TV is securely mounted, it’s time to tidy up any hanging wires or cables. Depending on the design of your mount, you may be able to conceal the cables inside the wall cavity. Alternatively, you can use adhesive strips to attach the cables to the wall.
Another option for concealing wires and cables is to use a cable cover. These covers come in various sizes and colors to match your wall and can be easily installed with adhesive strips or screws. They provide a sleek and organized look, while also protecting your cables from damage. Make sure to measure the length of your cables before purchasing a cover to ensure a proper fit.
Tips and Tricks for Adjusting Your Corner TV Wall Mount
Once everything is installed and connected, take some time to experiment with the TV angle. The most important thing is to make sure that the screen is at a comfortable viewing angle. With a corner TV wall mount, you have more flexibility to adjust the angle in different directions to find the perfect viewing spot.
Another important factor to consider when adjusting your corner TV wall mount is the lighting in the room. Make sure that there is no glare or reflection on the screen, as this can cause eye strain and make it difficult to see the picture clearly. You may need to adjust the angle of the TV or add curtains or blinds to block out any unwanted light. Additionally, if you have a soundbar or other audio equipment, make sure that it is positioned correctly to ensure optimal sound quality.
Troubleshooting Common Installation Issues
If your TV is not sitting level on the bracket, you may need to adjust your mount. Make sure to double-check that everything is straight and level to ensure maximum support.
If you’re having trouble aligning the mounting bracket to the back of the TV, double-check the instructions to make sure that you’re looking at the correct bracket or adapter.
If you’re experiencing poor picture quality, make sure that all cables are securely connected and that you have selected the correct input on your TV. Additionally, check that your TV and any connected devices are set to the appropriate resolution for optimal viewing.
Conclusion
As you can see, installing a corner TV wall mount could be a bit complicated, but the benefits of doing so are well worth it. By following these steps carefully, you can enjoy a beautiful TV viewing experience, while creating more living space in the process. And, if you need any assistance, you can always hire a professional to get the job done right.
It’s important to note that not all corner TV wall mounts are created equal. Be sure to do your research and choose a mount that is compatible with your TV size and weight, as well as your wall type. Additionally, consider the viewing angle and adjustability options of the mount to ensure the best possible viewing experience. With the right corner TV wall mount, you can transform your living space and enjoy your favorite shows and movies in style.