A wall-mounted tv with a level and adjustment tools

If you have recently installed a wall mount for your TV, you may find that it is tilted slightly to one side or too high or too low. Adjusting the level of your TV mount is an important step to ensure that your TV is secure and stable, as well as providing an optimal viewing experience. In this article, we will guide you through the process of adjusting the level on your TV wall mount.

Tools Required for Adjusting TV Wall Mount Level

To adjust the level on your TV wall mount, you will need a few tools:

  • Bubble level
  • Screwdriver

Make sure the bubble level is at least as long as the width of your TV to ensure a precise level measurement.

Additionally, it may be helpful to have a stud finder to locate the studs in your wall for secure mounting. If you do not have a stud finder, you can use a hammer and small nail to tap along the wall until you hear a solid sound, indicating the presence of a stud.

Unmounting the TV from the Wall Bracket for Easy Level Adjustment

Before you start adjusting the level of your TV wall mount, it is recommended to unmount the TV from the bracket to avoid any damages. This step will make it easier to adjust the level of the wall mount without risking damage to the TV. Use a screwdriver to loosen and remove the screws that are holding the TV to the wall mount. Once the TV is free from the bracket, place it on a soft and flat surface.

After unmounting the TV from the wall bracket, you can now adjust the level of the wall mount. Use a level tool to ensure that the wall mount is perfectly level. Adjust the wall mount by tightening or loosening the screws on the bracket until it is level. Once you have adjusted the wall mount, you can now remount the TV onto the bracket.

It is important to note that when remounting the TV onto the bracket, you should ensure that the screws are tightened securely. Loose screws can cause the TV to fall off the wall mount, which can result in damages or injuries. Double-check that the TV is securely mounted onto the bracket before letting go of it.

See also  How to Mount Tcl 55 Inch Tv

Checking the Level of the Wall Mount Bracket

After you have removed the TV from the wall bracket, it is now time to check the level of the bracket itself. The bracket needs to be installed on the wall at a level position to ensure that your TV is not tilted when mounted. Use the bubble level and place it on the top edge of the wall bracket. Check to see if the bubble is centered. If it is not, then adjust the bracket as required until the bubble becomes centered. Once the bracket is leveled, proceed to the next step.

It is important to note that the type of wall you are mounting the bracket on can affect the level of the bracket. For example, if you are mounting the bracket on a plaster wall, you may need to use anchors to ensure that the bracket is securely attached and level. On the other hand, if you are mounting the bracket on a concrete wall, you may need to use a masonry bit to drill the holes for the screws.

Additionally, if you are mounting a larger TV, it is recommended to have a second person assist you with the installation process. This will ensure that the TV is safely mounted and that the bracket is level. It is also important to follow the manufacturer’s instructions carefully to avoid any damage to your TV or the wall.

How to Adjust the Tilt of Your TV Wall Mount

If you need to adjust the angle of the TV on the wall, you will need to use the tilt function of your TV mount. Most wall mounts come with a tilt adjustment which allows you to adjust the angle of the TV forwards or backward. To adjust the angle, use a screwdriver or the tool that came with your wall mount to loosen the screws on the tilt mechanism. Tilt your TV as desired and then tighten the screws back in place.

It is important to note that when adjusting the tilt of your TV wall mount, you should be careful not to over-tighten the screws. Over-tightening can cause damage to the mount or the TV itself. Additionally, make sure to check the weight limit of your wall mount before installing your TV. If your TV is too heavy for the mount, it can cause the mount to fail and potentially damage your TV or injure someone nearby. Always follow the manufacturer’s instructions and guidelines when installing and adjusting your TV wall mount.

How to Use a Bubble Level for Accurate Leveling

To accurately level the TV once it is mounted back on the bracket, you will need to use a bubble level. Simply hold the bubble level on the top edge of your TV and make small adjustments to the bracket until the bubble becomes centered. Repeat the process along both edges of the TV to make sure it is leveled correctly.

See also  How to Mount Ps3 Eye Camera on Tv

It is important to note that the surface the TV is mounted on should also be level. If the surface is not level, it can affect the accuracy of the bubble level. To ensure the surface is level, use a larger bubble level or a laser level to check the surface before mounting the TV. This will help to ensure that the TV is level and secure on the wall.

Adjusting Your TV Wall Mount with a Digital Level App

If you want to take your leveling precision a notch higher, you can use a digital level app on your smartphone. Download a digital level app, place the phone on the top edge of the TV, and make small adjustments until the app reads a level reading. This method can provide more accuracy than using a bubble level.

Another advantage of using a digital level app is that it can save you time. With a bubble level, you may need to adjust the level multiple times to get it just right. However, with a digital level app, you can quickly see if the TV is level and make any necessary adjustments in one go.

It’s important to note that not all digital level apps are created equal. Some may be more accurate than others, so it’s a good idea to do some research and read reviews before choosing an app to use. Additionally, make sure to calibrate the app before using it to ensure accurate readings.

The Importance of Properly Levelling Your TV Wall Mount

Properly leveling your TV wall mount is crucial for two main reasons: Your TV needs to be mounted securely and that it looks right aesthetically. A level TV will also reduce the risk of it falling off the mount and causing damage or injury. Additionally, a wonky-looking TV can be a source of annoyance even for the most tolerant homeowner.

Another important reason to properly level your TV wall mount is to ensure that you have the best viewing experience possible. If your TV is not level, it can cause distortion in the picture quality, making it difficult to watch your favorite shows or movies. This can be especially frustrating if you have invested in a high-quality TV with advanced features. By taking the time to properly level your TV wall mount, you can ensure that you are getting the most out of your viewing experience.

See also  How to Mount Roku to Tv

Tips for Avoiding Common Mistakes When Adjusting Your TV Wall Mount

  • Make sure the bracket is securely fitted to the wall
  • Never attempt to adjust the level by rotating or twisting the bracket
  • Ensure you have the right tools for the job to make the process as smooth as possible
  • Use a spirit level for the simplest and most accurate method of levelling. Digital level apps work too

Following these tips will help prevent damage to your TV or the wall mount, and make adjusting the level much easier.

It’s also important to consider the weight of your TV when choosing a wall mount. Make sure the mount you select is rated to support the weight of your TV. If the mount is not strong enough, it could fail and cause damage to your TV or even injure someone. Always check the weight rating before purchasing a wall mount.

Troubleshooting Common Issues with Leveling Your TV Wall Mount

If you are having trouble getting your wall mount level, double-check that the bracket is attached to the wall securely. Loose screws or an improperly fixed bracket can make it challenging to level the TV. Make sure to use a bubble level or digital level app for a proper reading. If aligning the level of the TV still proves challenging, you may want to call on professional help to ensure that your mount is levelled correctly.

Another common issue that can arise when leveling your TV wall mount is the weight distribution of the TV. If the TV is heavier on one side, it can cause the mount to tilt and make it difficult to level. To fix this issue, try adjusting the placement of the TV on the mount to distribute the weight evenly. You can also use a stud finder to ensure that the mount is attached to a sturdy part of the wall to support the weight of the TV.

Ensuring Your TV is Securely Mounted After Making Adjustments

Once you have adjusted the level of the wall mount and are content with the TV’s position, you will need to remount it. Double-check that your TV is securely attached to the bracket before releasing it. Re-insert the screws or bolts to hold the TV in place.

It is important to note that the weight of your TV can affect the stability of the wall mount. If your TV is particularly heavy, it may be necessary to use additional support, such as a brace or anchor, to ensure that the mount can handle the weight. This will help prevent the TV from falling or becoming dislodged from the wall.

Additionally, it is recommended that you periodically check the mount and screws to ensure that they remain secure over time. Vibrations from the TV or other factors can cause the mount to loosen, which can be dangerous. By regularly inspecting the mount and tightening any loose screws, you can help ensure that your TV remains safely and securely mounted.

Final Thoughts on Adjusting Levels on Tv Wall Mounts

Adjusting your TV wall mount level is a task that requires patience and attention. By following the steps provided in this article, you can ensure that your TV is secure, stable, and aesthetically pleasing. Properly aligning your TV will also help provide an optimal viewing experience. Correcting any issues early on will help avoid problems later on.

By admin