If you have recently purchased an LG LMXS28626S fridge, you may be wondering how to install a water line to enjoy the convenience of having a fresh, cold glass of water or ice from your fridge’s water dispenser. Fortunately, installing a water line is a simple process that can be completed with just a few basic tools and supplies. In this guide, we’ll walk you through the steps you need to follow to install a water line on your LG LMXS28626S fridge.

Gather the necessary tools and supplies for the installation process

Before you start the installation process, you will need to gather the necessary tools and supplies. Here’s what you will need:

  • A water line
  • A compression fitting
  • A shutoff valve
  • A tubing cutter
  • A wrench
  • A Teflon tape

Once you have these tools and supplies ready, you can move on to the next step.

It is important to note that the size of the water line and compression fitting should match the size of the refrigerator’s water inlet valve. If they do not match, you will need to purchase the correct size before proceeding with the installation.

Additionally, before beginning the installation process, make sure to turn off the main water supply to your home. This will prevent any water from flowing while you are working on the installation, and will also ensure your safety.

Turn off the water supply before starting the installation process

Before you start working on your fridge, you need to turn off the water supply. To do this, locate the water shut-off valve that supplies water to your fridge and turn it off. This will prevent any water from flowing through the lines, making it safer for you to work on the installation.

It is important to note that turning off the water supply is not only for your safety, but also to prevent any potential water damage to your home. If a water line were to break or leak during the installation process, it could cause significant damage to your floors, walls, and other appliances. By turning off the water supply, you can avoid any potential water damage and ensure a smooth installation process.

See also  VideoSecu TV wall mount vs Mount-It! TV wall mount

Locate the water valve at the back of your fridge

The next step in the installation process is to locate the water valve at the back of your fridge. It should be on the lower left-hand side. Once you locate the valve, you can move on to the next step.

It is important to note that not all fridges come with a water valve. If you cannot locate the valve at the back of your fridge, check the user manual or contact the manufacturer for assistance.

Before proceeding with the installation, make sure to turn off the water supply to your fridge. This can usually be done by turning off the main water supply valve in your home. It is important to do this to prevent any leaks or water damage during the installation process.

Determine the type of water line you need to install for your LG LMXS28626S fridge

Before installing the water line, you need to determine the type of water line you need. The majority of LG LMXS28626S models use quarter-inch copper tubing, so this is what we’ll be using.

However, if your home has a plastic water supply line, you will need to use a different type of water line. In this case, you will need to use a compression fitting to connect the plastic line to the refrigerator’s water inlet valve. It’s important to ensure that the water line you choose is compatible with your refrigerator model and your home’s water supply.

Measure and cut the water line to fit your fridge’s dimensions

Once you have determined the type of water line you need, you can measure and cut the water line to fit your fridge’s dimensions. Use a tubing cutter to cut the copper tubing to the right length. Be sure to measure twice and cut once to avoid any mistakes.

It’s important to note that the water line should be long enough to allow you to move the fridge away from the wall for cleaning or maintenance. A good rule of thumb is to add an extra 6-8 inches to the length of the water line. This will give you enough slack to move the fridge without putting any strain on the water line or connections.

See also  how to adjust a pull-down TV mount for 20 degrees?

Install a compression fitting onto the water line

The next step is to install a compression fitting onto the water line. This fitting will allow you to connect the water line to the fridge’s water valve. Follow the manufacturer’s instructions for installing the fitting onto the copper tubing, ensuring that you use Teflon tape on the threads to prevent any leaks.

It’s important to note that before installing the compression fitting, you should turn off the water supply to the fridge. This can usually be done by turning a valve located near the water line. Once the water supply is turned off, you can proceed with installing the compression fitting. After the fitting is securely in place, turn the water supply back on and check for any leaks. If you notice any leaks, tighten the fitting or add more Teflon tape to the threads as needed.

Connect the water line to your fridge’s water valve

With the compression fitting installed, it’s time to connect the water line to the fridge’s water valve. Ensure that you tighten the compression fitting securely with a wrench. This will prevent any water from leaking out of the connection.

Before connecting the water line, make sure to turn off the water supply to your fridge. This can usually be done by turning a valve located near the water source. Once the water supply is turned off, you can safely connect the water line to the fridge’s water valve. After connecting the line, turn the water supply back on and check for any leaks. If you notice any leaks, tighten the compression fitting further or replace the fitting altogether.

Turn on the water supply and check for any leaks in your installation

Once you’ve connected the water line to the water valve, turn the water supply back on and check for any leaks in your installation. Run a small amount of water through your fridge’s water dispenser to ensure that the water is flowing properly and that there are no leaks. If you notice any leaks, turn off the water supply and recheck all the connections.

It’s important to note that if you’re installing a new water line, you may experience some air pockets in the line. This can cause sputtering or spurting when you first turn on the water supply. To eliminate any air pockets, run the water dispenser for a few minutes until the water flows smoothly.

Additionally, it’s a good idea to periodically check your water line for any signs of wear or damage. If you notice any cracks or leaks, it’s important to replace the line as soon as possible to prevent any water damage to your home or appliances.

See also  What does a bad refrigerator compressor sound like?

Test your LG LMXS28626S fridge’s water dispenser for proper functionality

With the water line installed and checked for any leaks, it’s time to test your LG LMXS28626S fridge’s water dispenser for proper functionality. Dispense some water from the dispenser to ensure that it is working properly. If it is not working, check the connections to the water source and the dispenser.

It is important to note that the first few dispenses of water may have a strange taste or odor due to air in the water line. This is normal and should go away after a few uses. If the taste or odor persists, try flushing the water line by dispensing several gallons of water.

Additionally, it is recommended to replace the water filter every six months to ensure the water dispensed from the fridge is clean and fresh. Refer to the user manual for instructions on how to replace the water filter.

Troubleshoot common issues that may arise during installation or usage

If you encounter any issues during the installation or usage of your LG LMXS28626S fridge’s water dispenser, check the manufacturer’s user manual for troubleshooting instructions. Common issues include low water pressure, blockages in the water line, and leaks in the water dispenser.

Another common issue that may arise with the water dispenser is a strange taste or odor in the water. This can be caused by a variety of factors, such as a dirty water filter or a buildup of bacteria in the water line. To fix this issue, try replacing the water filter and flushing the water line with a mixture of water and vinegar.

In some cases, the water dispenser may stop working altogether. This can be caused by a malfunctioning water valve or a faulty dispenser switch. If you have checked the user manual and tried troubleshooting the issue yourself, it may be necessary to contact a professional repair service to diagnose and fix the problem.

Frequently asked questions about installing a water line on an LG LMXS28626S fridge

Here are some frequently asked questions about installing a water line on an LG LMXS28626S fridge:

  • Q: Can I use PVC tubing instead of copper tubing?
    A: It is not recommended to use PVC tubing, as it is not rated for use with potable (drinkable) water.
  • Q: How long does the installation process take?
    A: The installation process should take about an hour.
  • Q: Do I need to hire a professional to install the water line?
    A: No, you can install the water line yourself with the right tools and supplies.

Now that you know how to install a water line on your LG LMXS28626S fridge, you can enjoy the convenience of having fresh, cold water and ice at your fingertips. If you encounter any issues during the installation process, don’t hesitate to reach out to the manufacturer for assistance.

It is important to note that before beginning the installation process, you should turn off the water supply to your home. This will prevent any leaks or water damage while you are installing the water line. Additionally, make sure to read the manufacturer’s instructions carefully and gather all necessary tools and supplies before starting the installation process.

By admin