If you own an articulating TV mount, you’ll want to adjust it from time to time to ensure the perfect angle for your viewing experience. Adjusting your articulating TV mount for 10 degrees is an excellent way to enhance your viewing experience. However, this is a delicate process and should only be done with the right tools and equipment, the right workspace setup, and thorough understanding of the process involved. In this article, we will guide you on how to adjust your articulating TV mount for 10 degrees while avoiding any damages to the wall or the mount in question.
Understanding the basics of an articulating TV mount
An articulating TV mount is a type of wall mount that allows you to adjust your TV’s angle to your preference, even with a significant deviation from the central viewing angle. It is also known as an adjustable mount as it enables you to tilt, swivel or extend your TV’s position. Articulating TV mounts are suitable for larger TVs and can support more weight than a standard mount. An articulating mount is beneficial if you want to watch TV from multiple angles or if you have space constraints in your living room.
One of the advantages of an articulating TV mount is that it can help reduce glare and reflections on your TV screen. By adjusting the angle of your TV, you can avoid unwanted reflections from windows or lights in your room. Additionally, an articulating mount can help you save space in your living room by allowing you to position your TV closer to the wall when not in use.
When choosing an articulating TV mount, it is important to consider the weight and size of your TV. Make sure to select a mount that can support the weight of your TV and is compatible with its size. It is also essential to ensure that the mount is securely attached to the wall to prevent any accidents or damage to your TV.
Tools and equipment required for adjusting an articulating TV mount
The adjustment process requires a few specific tools and equipment, which are as follows:
- A screwdriver set
- A level
- A stud finder
- An adjustable wrench
It is important to note that the size and weight of the TV being mounted may also require additional equipment, such as a drill and appropriate screws or bolts. It is recommended to consult the manufacturer’s instructions or seek professional assistance if unsure about the necessary equipment for your specific TV mount.
Preparing your workspace for the adjustment process
Before you start adjusting your TV mount, you must prepare your workspace. First, ensure that everything is clear from the area around the TV mount. Remove any objects that may obstruct the mount’s movement. Second, use a stud finder to locate the studs behind the wall. You will need to secure your TV mount to these studs to ensure stability. Finally, make sure you have a level surface to work on, as this will be important when aligning the mount.
It is also important to have the necessary tools on hand before beginning the adjustment process. You will need a screwdriver, a drill, and possibly a wrench or pliers depending on the type of TV mount you have. It is also recommended to have a friend or family member assist you with the adjustment process, as it can be difficult to handle the TV mount alone. By having the proper tools and assistance, you can ensure a safe and successful adjustment of your TV mount.
Assessing the angle of your TV mount and determining the degree of adjustment required
To determine your TV mount’s angle, you need to start by placing a level on the TV’s surface. Next, adjust the arms of the mount to align with the angle of the TV, making sure to keep the bubble level in the center of the level. Once you have done this, you should be able to tell how many degrees off the TV is. Determine how many degrees you need to adjust the mount to make it level with the ground, and then proceed to the next step.
It is important to note that the ideal angle for your TV mount may vary depending on the size and height of your TV, as well as the layout of your room. For example, if your TV is mounted above a fireplace, you may need to adjust the angle to avoid neck strain while watching. Additionally, if you have a large room with multiple seating areas, you may want to consider a mount that allows for swiveling to ensure optimal viewing angles from different locations. Take these factors into consideration when assessing the angle of your TV mount and making adjustments.
Tips for adjusting an articulating TV mount without damaging your wall or causing injury
Adjusting an articulating TV mount can be dangerous and damaging if not done correctly. It’s important to follow these tips to avoid injury, prevent wall damage, or even harm to your TV or mount:
- Do not attempt to lift the TV mount on your own. Have someone assist you, or use a ladder to support the weight during the adjustment process.
- Be aware of where the wires are and avoid damaging them during the adjustment process.
- Do not use excessive force when adjusting the mount. This can damage the mount or cause injury.
- Be careful not to scratch or dent the wall, as this can damage the wall and make it more difficult to re-adjust the mount in the future.
- Take breaks as needed to prevent fatigue, which can lead to mistakes and potential injury.
Another important tip to keep in mind is to make sure that the mount is securely attached to the wall before attempting any adjustments. Loose mounts can cause the TV to fall and cause serious injury or damage.
It’s also a good idea to read the manufacturer’s instructions carefully before attempting any adjustments. Different mounts may have different adjustment mechanisms and requirements, and following the instructions can help prevent mistakes and damage.
Step-by-step guide to adjusting your articulating TV mount for 10 degrees
Now that you understand the basics and have your workspace ready, follow these simple steps to adjust your articulating TV mount:
- Remove your TV from the mount to avoid damages or strain during the adjustment process.
- Loosen the screws on the mount. Use a screwdriver or adjustable wrench to adjust the arms of the mount to the desired angle.
- Tighten the screws back into place once the adjustment has been made.
- Test the mount by placing the TV back on it and adjusting the arms to ensure they stay in place and hold the TV securely.
- Test the angle of the TV by using a level in the same way you did earlier.
- If the angle is still not correct, repeat steps 2 to 4 until you achieve the desired 10-degree angle.
It is important to note that not all articulating TV mounts are the same. Some may have different mechanisms for adjusting the angle, so it is always best to refer to the manufacturer’s instructions before attempting any adjustments. Additionally, if you are unsure about any part of the process, it is recommended to seek the assistance of a professional to avoid any potential damages or injuries.
Troubleshooting common issues encountered during the adjustment process
There are a few common issues that you may encounter during the adjustment process. These may include the screws not fitting properly, the arms of the mount not aligning correctly, or accidental damage to the wall. If you encounter any issues, stop immediately and seek professional help if needed. If you are unsure about something or are having trouble, it’s always better to err on the side of caution.
Another common issue that may arise during the adjustment process is the weight of the mounted object. If the mount is not strong enough to support the weight of the object, it may cause the mount to become loose or even fall off the wall. It’s important to ensure that the mount you choose is rated for the weight of the object you are mounting. If you are unsure about the weight rating or have any concerns, consult with a professional before proceeding with the adjustment process.
How to maintain and care for your articulating TV mount after making adjustments
After making the adjustment, it’s a good idea to clean your articulating TV mount regularly to ensure that it remains in good working order. Dust and debris can accumulate on the mount over time, causing it to lose its flexibility or corrode. To keep it clean, use a soft cloth and cleaning solution, and avoid using any harsh abrasives or chemicals.
In addition to regular cleaning, it’s important to periodically check the tightness of the screws and bolts on your articulating TV mount. Over time, these can loosen and cause the mount to become unstable or even fall off the wall. Use a screwdriver or wrench to tighten any loose screws or bolts, and make sure they are securely fastened to the wall or ceiling.
Advantages of using an articulating TV mount and how it enhances your viewing experience
Articulating TV mounts provide a variety of benefits for TV viewers, including improved viewing angles, better accessibility for cleaning or maintenance, and more flexibility in how you position your TV. Additionally, an articulating TV mount can make your TV appear less like a bulky object and more like a piece of art on your wall. Overall, adjusting your articulating TV mount for 10 degrees will be a valuable investment in your overall viewing experience.
Following the guidelines in this article will enable you to safely and efficiently adjust your articulating TV mount for better viewing angles. Keep in mind that the adjustment process can vary depending on the make and model of your TV mount, so it’s a good idea to double-check the manufacturer’s guidelines before making any adjustments. Take your time and follow these steps carefully for the best results.
Another advantage of using an articulating TV mount is that it can help reduce glare and reflections on your TV screen. By adjusting the angle of your TV, you can minimize the amount of light that reflects off the screen, making it easier to see the picture and reducing eye strain. This is especially useful if you have windows or other light sources in the room that can cause glare on your TV.
Furthermore, an articulating TV mount can also help you save space in your room. By mounting your TV on the wall, you can free up valuable floor space that would otherwise be taken up by a TV stand or cabinet. This can be especially beneficial in smaller rooms or apartments where space is at a premium. Additionally, an articulating TV mount allows you to position your TV in a way that maximizes your viewing experience without taking up too much space.