Mounting your TV on a swivel mount can be a great way to enhance your viewing experience. It allows you to adjust the angle of your TV for the perfect viewing position, no matter where you are seated in the room. However, it’s important to know how to adjust your swivel TV mount properly to get the best result. In this article, we will guide you through the process of adjusting a swivel TV mount for 20 degrees to help you get the most out of your viewing experience.
Understanding the swivel TV mount and its features
Before you start adjusting your swivel TV mount, it’s important to understand the components and features of the mount. A swivel mount consists of two parts, a wall mount, and a bracket that holds the TV. The bracket is attached to the TV and fixed to the wall mount, which allows you to swivel the TV horizontally and vertically. Some swivel mounts have additional features like tilt and extension.
One important factor to consider when choosing a swivel TV mount is the weight capacity. Make sure to check the weight of your TV and compare it to the weight capacity of the mount. Choosing a mount with a weight capacity that is too low can result in the TV falling off the mount and causing damage or injury.
Another feature to look for in a swivel TV mount is cable management. Some mounts have built-in cable management systems that allow you to hide the cables and wires behind the TV, creating a cleaner and more organized look. This can be especially useful if you have multiple devices connected to your TV, such as a gaming console, soundbar, or streaming device.
Tools required for adjusting a swivel TV mount
Adjusting a swivel TV mount is not challenging if you have the necessary tools. Before you start adjusting, ensure you have the following tools for the process:
- Phillips head screwdriver
- Leveler
- Hex wrench
- Socket wrench
- Measuring tape
It is important to note that the size of the tools required may vary depending on the specific swivel TV mount you are adjusting. It is recommended to check the manufacturer’s instructions or website for the appropriate tool sizes before beginning the adjustment process.
Safety measures to consider before adjusting a swivel TV mount
When adjusting a swivel TV mount, safety should be your priority. Remember to adhere to the following safety measures:
- Ensure the TV mount is securely fixed to the wall.
- Enlist the help of another person when adjusting the TV mount to avoid any accidents.
- Avoid overloading your mount with a TV weight that exceeds its capacity. Read the manufacturer’s instructions and recommendations before choosing a TV to mount on the swivel mount.
Additionally, it is important to check the condition of the wall where the TV mount will be installed. Make sure the wall is strong enough to support the weight of the TV and the mount. If the wall is weak or damaged, it is recommended to reinforce it before installing the mount.
Furthermore, before adjusting the swivel TV mount, make sure all cables and wires are properly connected and secured. Loose cables can cause the TV to fall or become unstable, which can be dangerous. It is also important to regularly check the cables and wires to ensure they are not damaged or frayed.
Steps to adjust the tilt angle on a swivel TV mount
The tilt angle on a swivel TV mount allows you to adjust the angle of the TV up or down. Below are the steps to follow when adjusting the tilt angle:
- Locate the screws on the bracket that hold the TV and undo them either with a screwdriver or a hex wrench
- Hold onto the TV’s top and bottom sections then adjust the tilting angle accordingly until the leveler indicates that it is tilted appropriately
- Hold the bracket again and tighten the screws back with a hex wrench.
It is important to note that when adjusting the tilt angle on a swivel TV mount, you should avoid over-tightening the screws as this can cause damage to the bracket or the TV. Additionally, it is recommended to have a second person assist you when adjusting the tilt angle to ensure that the TV is held securely and to prevent any accidents or injuries.
Tips for adjusting the horizontal angle on a swivel TV mount
The horizontal angle on a swivel mount allows you to adjust the TV from right to left. Below are the steps to follow to adjust the horizontal angle:
- Locate the screws on the bracket holding the TV, and loosen them either with a screwdriver or hex wrench.
- Hold the TV and move it slowly from one side to the other until it reaches a proper horizontal angle
- Hold the bracket, and screw the TV back into place with a hex wrench.
It is important to note that when adjusting the horizontal angle, you should also consider the viewing distance and height. The TV should be at a comfortable eye level and not too far away from the viewer.
Additionally, if you have a larger TV, it may be helpful to have someone assist you in adjusting the horizontal angle. This will ensure that the TV is properly aligned and prevent any accidental drops or damage to the TV.
How to adjust the vertical angle on a swivel TV mount
Similar to the horizontal adjustment, the vertical angle on a swivel TV mount allows you to adjust the TV up and down. Follow these steps to adjust the vertical angle:
- Locate the screws at the back of the wall mount and loosen them either with a screwdriver or a socket wrench.
- Hold the TV and move it gradually up and down until the desired leveler position is reached.
- Once you are satisfied with the TV’s position, screw the screws back into place with a socket wrench.
It is important to note that when adjusting the vertical angle on a swivel TV mount, you should also consider the viewing distance and angle. The TV should be positioned at a comfortable height and angle for optimal viewing experience. Additionally, make sure to tighten the screws securely to prevent the TV from tilting or falling.
Adjusting the viewing distance and height of your TV using a swivel mount
When it comes to watching TV, the viewing height and distance are crucial factors that determine your comfort. Adjusting the height and the distance of the TV ensures that you get the best viewing experience. Here’s how you can do it:
- Measure the distance from the back of the TV to the wall mount.
- Using a tape measure, measure the distance from the couch or seating area to where you want the TV to be mounted on the wall.
- Adjust the swivel TV mount according to your measurement to ensure you have your desired viewing height and distance.
It is important to note that the ideal viewing distance and height may vary depending on the size of your TV and the layout of your room. For instance, if you have a larger TV, you may need to sit further away to avoid eye strain. Similarly, if you have a small room, you may need to mount the TV higher to save space.
Another factor to consider when adjusting the viewing distance and height is the angle of the TV. Ideally, the TV should be mounted at eye level to prevent neck strain. However, if you have a swivel mount, you can adjust the angle of the TV to suit your viewing position.
Troubleshooting common issues when adjusting a swivel TV mount
When adjusting a swivel TV mount, you may encounter some problems. Below are some common issues you may experience and how to fix them:
- The TV mount might be loose- you can fix this by tightening the screws using a screwdriver or socket wrench.
- The TV mount can be too tight- loosen the screws either by using a hex wrench or a screwdriver.
- The TV may lean forward or backward- check to see if the wall mount is level. If not, adjust to achieve a perfect level.
Another common issue when adjusting a swivel TV mount is that the TV may not be centered. This can be fixed by adjusting the mount’s horizontal and vertical position until the TV is centered. You can use a level to ensure that the TV is perfectly centered.
If you are experiencing issues with the swivel function of the mount, it may be due to the weight of the TV. Make sure that the mount is rated for the weight of your TV. If it is not, you may need to purchase a new mount that can support the weight of your TV.
Maintenance tips for keeping your swivel TV mount in good condition
To ensure your swivel mount lasts a long time, it’s essential to maintain it properly. Here are some maintenance tips to consider:
- Regularly check the mount for signs of wear and tear.
- Keep the mount free from dust by cleaning it often.
- Avoid hanging heavy objects from the TV when it’s mounted on the mount.
Frequently asked questions about adjusting a swivel TV mount
Here are some frequently asked questions about adjusting a swivel TV mount:
- Can I adjust the swivel mount by myself?
- What tools do I require to adjust my swivel mount?
- What is the maximum TV weight that can be mounted on a swivel mount?
It’s advisable to have another person help you when adjusting your swivel mount to avoid any accidents.
You will require a Phillips head screwdriver, leveler, hex wrench, socket wrench, and measuring tape.
Check the manufacturer’s instructions to see the maximum weight that can be mounted on your swivel mount.
Comparing different types of TV mounts and their adjustability features
Swivel TV mounts are just one type of TV mount available in the market. Here’s a comparison of different types of TV mounts and their adjustability features:
| Type of mount | Adjustability features | Limitations |
|---|---|---|
| Fixed mounts | None | TV cannot be adjusted once it’s fixed |
| Tilt mounts | Vertical tilt angles | No horizontal adjustability |
| Full-motion mounts | Full range of motion, vertical and horizontal adjustability | Expensive and takes up more space compared to other mounts |
Now that you understand how to adjust a swivel TV mount, you should have no problem getting your TV in the perfect position for your next movie night. Just remember to follow safety measures, use the right tools, and regularly maintain your swivel mount to keep it in good condition. Happy viewing!