If you have recently purchased a Sanus TV wall mount, you may be eager to install it yourself and free up some floor space in your home. While the task may seem daunting at first, with the right tools and preparation, you can easily accomplish this DIY project. This guide will take you through all the necessary steps to install the Sanus F215c TV wall mount with ease.
Gather Your Tools and Materials
Before you start installing your Sanus TV wall mount, you need to prepare by gathering all the tools and materials you will need. This includes a power drill, stud finder, level, measuring tape, pencil, and all the hardware that came with the mount. Make sure you have all the equipment before you begin the installation process.
It is also important to have a helper when installing a TV wall mount, especially if the TV is large and heavy. Having an extra set of hands can make the process much easier and safer. Additionally, it is recommended to wear safety goggles and gloves to protect yourself from any potential hazards during the installation.
Find the Perfect Spot for Your TV
The next step is to choose the ideal spot for your TV. Consider factors like room layout, viewing angles, distance from seating areas, and ease of cable routing. Once you have chosen the spot, use your measuring tape and pencil to mark where you want to mount your TV and ensure it is level.
It is also important to consider the lighting in the room when choosing the spot for your TV. Avoid placing the TV in direct sunlight or in a spot where there is a lot of glare. This can cause eye strain and make it difficult to see the screen. If you have windows in the room, consider installing blackout curtains or blinds to control the amount of light that enters the room.
Measure and Mark the Mounting Location
Once you’ve chosen the perfect spot for your TV, measure and mark the mounting location. Take note of the measurements for both the height and center of the desired location, and use them to position the wall bracket for the Sanus TV mount.
It is important to ensure that the wall you are mounting the TV on is strong enough to support the weight of the TV and the mount. Use a stud finder to locate the studs in the wall and mark them with a pencil. This will help you to position the wall bracket in a secure location.
Before drilling any holes, double-check the measurements and make sure that the bracket is level. Use a spirit level to ensure that the bracket is straight, and adjust it if necessary. Once you are satisfied with the position of the bracket, use a drill to make pilot holes in the wall, and then attach the bracket using screws and wall anchors.
Verify the Wall is Structurally Sound
Before mounting your TV on the wall, it is essential to ensure that the wall is structurally sound. Use a stud finder to locate the studs in the wall as these will be your mounting points. Make sure you mount your TV wall bracket directly to the studs, as this will provide maximum stability.
It is also important to consider the weight of your TV and the maximum weight capacity of your wall bracket. If your TV is too heavy for the bracket, it could cause the bracket to fail and your TV to fall off the wall. Always check the weight capacity of your bracket and make sure it is suitable for your TV before mounting.
Install the Wall Plate and Attach the Arms
Once you have verified that your wall is sound, install the wall plate using the screws and anchors provided. Then attach the arms to the wall plate and ensure everything is well-secured. Double-check that the arms are level and use a level for accuracy.
It is important to note that the weight capacity of the wall plate and arms should be considered before installing any heavy objects. Be sure to check the manufacturer’s specifications and ensure that the wall plate and arms can support the weight of the object you intend to hang. Overloading the wall plate and arms can result in damage to your wall and potential safety hazards.
Attach the TV Brackets to Your TV
The next step is to attach the brackets to your TV. Make sure you use the correct bracket size provided in the Sanus TV wall mount kit. Attach the brackets securely, using the screws or bolts that are included in the kit.
Before attaching the brackets to your TV, make sure to clean the back of your TV thoroughly. This will ensure that the brackets adhere properly and securely to the TV. Use a microfiber cloth to wipe away any dust or debris.
Once the brackets are attached to your TV, it’s important to double-check that they are level. Use a spirit level to ensure that the brackets are straight and even. This will prevent your TV from being crooked or tilted when it’s mounted on the wall.
Hang Your Tv on the Wall Mount
Once the brackets are securely attached to your TV, carefully hang your TV onto the wall mount. Have someone assist you with this step, ensuring that the TV is level and straight as you hang it on the mount.
It is important to make sure that the wall mount is securely attached to the wall before hanging your TV. Use a stud finder to locate the studs in the wall and attach the mount to them for added stability. If you are unsure about how to properly attach the mount to the wall, consult a professional.
When hanging your TV on the wall mount, be sure to use the appropriate screws and bolts provided with the mount. Using the wrong hardware can result in the TV falling off the mount and causing damage or injury. Double-check that the screws are tightened securely and that the TV is properly seated on the mount before letting go.
Adjust and Secure Your TV to the Mounting Bracket
Now it is time to adjust your TV to the mounting bracket. Using a level, make sure your TV is level and then tighten the screws and bolts to ensure that it is securely mounted. Test your TV for stability and make sure it is well-secured so that it does not tip or tilt.
It is also important to consider the weight of your TV when mounting it to the bracket. Make sure that the bracket you have chosen is rated to hold the weight of your TV. If it is not, you risk the bracket breaking and your TV falling off the wall. Additionally, if you have a larger TV, it may be helpful to have a second person assist you with the mounting process to ensure that it is properly aligned and secured.
Hide Cords and Cables for a Clean Look
To enhance the aesthetic appeal of your installation, it is recommended that you hide cords and cables. Some Sanus TV wall mounts come with built-in cable management systems, which makes it easier to tuck cables away. Make sure to test all cords and connections before hiding them, as it may be difficult to access them later.
If your TV wall mount does not come with a built-in cable management system, there are still options for hiding cords and cables. You can use cable ties or cord covers to keep them organized and out of sight. Another option is to run the cords through the wall using an in-wall cable management kit. However, this option may require professional installation and should only be attempted by those with experience in electrical work.
Test Your TV for Stability and Functionality
Once you have completed the installation of your Sanus TV wall mount, it is essential to conduct a stability and functionality test. Check to make sure everything is secure and stable, and test all features of your TV to ensure that it is working correctly. At this point, you can relax and enjoy your newly installed TV wall mount.
It is recommended to conduct a stability and functionality test periodically, especially after any adjustments or movements of the TV. This will ensure that the TV remains securely mounted and all features are functioning correctly. Additionally, it is important to regularly inspect the wall mount and its components for any signs of wear or damage, and to address any issues promptly to maintain the safety and longevity of your TV installation.
Tips and Tricks for a Successful Installation
To make your installation even easier, there are a few tips and tricks that you can use. First, take your time and read the instructions carefully before beginning the installation process. Second, use a power drill with a built-in level to ensure that everything is level and straight. Finally, have someone to assist you during the installation process, as an extra set of hands can be helpful in ensuring everything is secure and stable.
By following this guide, you can easily install your Sanus TV wall mount without any hassle. Whether you’re a beginner or an experienced DIYer, this project is straightforward and excellent for freeing up floor space while enhancing your TV viewing experience.
Another tip to keep in mind is to make sure you have all the necessary tools and equipment before starting the installation process. This includes a stud finder, measuring tape, and a pencil to mark where the mount will be placed. Additionally, it’s important to have a level surface to work on, so consider using a workbench or table to assemble the mount before attaching it to the wall.
Lastly, don’t forget to test the mount’s stability and weight capacity before mounting your TV. This can be done by attaching a heavy object to the mount and ensuring that it stays securely in place. By taking these extra precautions, you can ensure a successful installation and enjoy your newly mounted TV with peace of mind.